:: Re: [Squatconf] openwrt help needed
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Daniel Golle
Ημερομηνία:  
Προς: Naomi R
Υ/ο: squatconf
Αντικείμενο: Re: [Squatconf] openwrt help needed
On Sun, Mar 26, 2017 at 06:28:21PM +0300, Naomi R wrote:
> Ok, that sounds like an interesting project but first I'm gonna make sure
> it has the specs we need for our use case (serving hundreds of users) and
> think about using a PC instead


The term project kinda suggests that it'd take more than 10 minutes,
which it most likely would not.
However, according to OpenWrt's wiki this is a Broadcom BCM63281 SoC
ie. MIPS32r2 with 320MHz, and it got 64 megs of RAM.
BCM63xxx isn't that much fun, so I'm not sure that'd be worth even that
(relatively small) effort... If you got a cargo box full of those
boxes then maybe yes, otherwise most likely it's easier to find some
more friendly hardware to perform the task.

>
> On 26 Mar 2017 18:24, "Daniel Golle" <daniel@???> wrote:
>
> > On Sun, Mar 26, 2017 at 06:21:06PM +0300, Naomi R wrote:
> > > I did already.
> > >
> > > Actually it turned out that the ISP firmware doesn't let you upload stuff
> > > that isn't from them. :(
> >
> > So lets find out how the firmware 'knows' that a binary comes 'from
> > them' or not. Shouldn't involve any hard to perform magic (but rather
> > just some bits in the header, supposedly).
> >
> > >
> > > On 26 Mar 2017 18:19, "No" <nonomos@???> wrote:
> > >
> > > > Try to shorten the filename
> > > >
> > > > On 03/26/2017 03:52 PM, Naomi R wrote:
> > > >
> > > > Thanks you!
> > > >
> > > > Are you suggesting that if I flash it first with the OEM (as opposed to
> > > > the existing ISP-branded) firmware I could then upload the openwrt?
> > > >
> > > > On 26 March 2017 at 16:47, Daniel Golle <daniel@???> wrote:
> > > >
> > > >> Hi!
> > > >>
> > > >> On Sun, Mar 26, 2017 at 04:36:04PM +0300, Naomi R wrote:
> > > >> > Hi, can anyone help with this issue?
> > > >> > https://forum.openwrt.org/viewtopic.php?pid=355063#p355063
> > > >> >
> > > >> > Thanks and sorry for the off-topic, but I know there are free-range
> > > >> > networking gurus among you :)
> > > >>
> > > >> I'm just about to go out now that ur message came in. I'll have a look
> > > >> later tonight or tomorrow. Is the stock firmware available for
> > > >> download somewhere?
> > > >>
> > > >> Cheers
> > > >>
> > > >> Daniel
> > > >>
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Squatconf mailing listSquatconf@???https://
> > mailinglists.dyne.org/cgi-bin/mailman/listinfo/squatconf
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Squatconf mailing list
> > > > Squatconf@???
> > > > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/squatconf
> > > >
> > > >
> >
> > > _______________________________________________
> > > Squatconf mailing list
> > > Squatconf@???
> > > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/squatconf
> >
> >