:: Re: [Libbitcoin] Proper handling af…
Forside
Slet denne besked
Besvar denne besked
Skribent: mlmikael
Dato:  
Til: Eric Voskuil
CC: libbitcoin
Emne: Re: [Libbitcoin] Proper handling after unexpected shutdown?
Ah, that approach makes all sense.

Now, what if the database is found to be correct at runtime, what logics
and exceptions are in place to handle that, are there guarantees that
LibBitcoin will not SIGSEGV, go into undefined behavior, etc.?

On 2016-05-17 00:23, Eric Voskuil wrote:
> This would not be sufficient. It requires atomicity of the write of the
> checksum and the data that has been summed. There is no facility to
> guarantee that atomicity, which is the original problem. Furthermore
> there can be inconsistency between two tables, so the atomicity needs
> to
> span files at the same time as protecting writes to a single file.
>
> Implementing these sort of guarantees requires a significant amount of
> overhead:
>
> https://en.wikipedia.org/wiki/Atomicity_(database_systems)#Implementation
>
> Given that the blockchain is merely a cache of public data, there is no
> reason to suffer this overhead. Corruption can be detected and the
> cache
> rebuilt. Optimization consists in preventing and reliably detecting the
> corruption, deploying with redundancy, and optimizing the cache
> rebuild.
>
> Along with hash table indexing, this design decision is fundamental to
> the version2 blockchain and material to its performance benefits.
>
> e
>
> On 05/16/2016 07:51 AM, mlmikael wrote:
>> A thought -
>>
>> Additional robustness could be achieved by storing checksums of the
>> involved data in the database files *and their location*, at even
>> intervals, together with some kind of overarching checksum information
>> that is written at "checkpoints" where the database is known to be in
>> a
>> consistent state.
>>
>> That way it would be possible to get a guarantee that the storage
>> media
>> has integrity in relation with LibBitcoin's logics (presuming ECC RAM
>> and a watertight CPU), by just reading the whole database file to
>> check
>> that the overarching checksum is correct (and to be safe, individual
>> checksums too).
>>
>> Would that be of value?
>>
>> On 2016-05-16 03:11, Eric Voskuil wrote:
>>> It is not presently possible to know whether there is corruption when
>>> a
>>> hard shutdown has occurred. On the other hand I'm not aware of any
>>> case
>>> where a corruption has occurred apart from a hard shutdown.
>>>
>>> Validating the data would require hash validation against each
>>> transaction and block. As for the indexes, it would probably be
>>> faster
>>> to rebuild them than to validate them. In version2 it will probably
>>> be
>>> as fast to rebuild as it would be to validate, assuming bandwidth is
>>> not
>>> constrained and you have a checkpoint near the top. This is because
>>> the
>>> cost for reading the entire store is basically the same as for
>>> writing
>>> the entire store.
>>>
>>> For this reason I haven't been planning to implement store
>>> validation/repair. On the other hand, it is very fast and easy to
>>> detect
>>> at startup that a shutdown previously occurred during a write. I have
>>> been planning to implement this detection in version2. The fix would
>>> be
>>> to rebuild the store, which again shouldn't be slower than a full
>>> validation.
>>>
>>> The store is very reliable if it is shutdown properly. So I would
>>> recommend the following precautions in a production environment:
>>>
>>> 1) As your chain grows, periodically add checkpoints to your
>>> configuration settings file. Don't pick points too close to the top
>>> or
>>> they could get reorganized out. If your block pool is 50 then 51
>>> blocks
>>> deep is entirely safe, since you can't reorganize deeper than that
>>> anyway. These additions will significantly speed a rebuild from the
>>> network. You could also rely on public sources, but this creates a
>>> centralization risk.
>>>
>>> 2) Periodically shut down a server and copy the store files to
>>> another
>>> directory on the same drive (or elsewhere). If you have a hard
>>> shutdown,
>>> change settings to use the saved location. The updated checkpoints
>>> from
>>> #1 will get you back to the top pretty quickly.
>>>
>>> 3) Maintain a second server on an independent device, using the same
>>> procedures. Configure each to exclude the other as a peer so that any
>>> corruption on one cannot affect the other. Having a second server
>>> will
>>> allow you to keep running while performing #2.
>>>
>>> Step three is recommended in a production environment apart from
>>> recovery purposes. When you post a tx from a client to a server you
>>> will
>>> not know for sure if the network has "accepted" the transaction until
>>> it's mined (and sufficiently deep in the chain). However if you want
>>> some confidence in that it is being distributed to miners you should
>>> query for the tx using the other server. Given they are mutually
>>> excluded as peers the presence of the tx will prove that it has moved
>>> through at least one external node.
>>>
>>> Using the above technique requires two servers always up and the
>>> ability
>>> to shut one down periodically. So maintaining a robust production
>>> environment requires at least three servers (and the ability to shift
>>> traffic away from the down server). I recommend four servers, with
>>> clients configured to send transactions to either of two and to
>>> retrieve
>>> from the mempool of either of the other two (single redundant
>>> failover).
>>> Other queries can be balanced across all four. This allows you to
>>> bring
>>> down one server in either of the two pools. The pools of course must
>>> be
>>> configured to exclude each others members as peers.
>>>
>>> e
>>>
>>>
>>> On 05/15/2016 07:20 AM, mlmikael wrote:
>>>> Hi Eric,
>>>>
>>>> Say that my machine shuts down unexpectedly. Perhaps at startup I
>>>> won't
>>>> even know that it did shut down unexpectedly so the LibBitcoin
>>>> database
>>>> could be in an inconsistent state.
>>>>
>>>> To mitigate that it would be great to do some kind of read operation
>>>> for
>>>> the whole database, that provides a verification deep enough to
>>>> prove
>>>> that the probability of an inconsistency is smaller than 1 in
>>>> ~10^10-10^20 .
>>>>
>>>> I.e., is there any cheaper way than doing a full local sync do a new
>>>> directory.
>>>>
>>>> What's in the box now and what do you suggest?
>>>>
>>>> Mlmikael
>>>>
>>
>>