On Mon, 19 Oct 2015 16:05:37 +0200
Didier Kryn <kryn@???> wrote:
> Le 19/10/2015 15:24, Hendrik Boom a écrit :
> > On Mon, Oct 05, 2015 at 05:13:40PM -0400, Hendrik Boom wrote:
> >> On Mon, Oct 05, 2015 at 09:47:02PM +0200, Riccardo Boninsegna wrote:
> >>> On Mon, Oct 5, 2015 at 9:12 PM, Hendrik Boom <hendrik@???> wrote:
> >>>> I installed lpr, and it did take a lot of cups off. Do I really need cups?
> >>> Nope, especially with a Brother that's very LPR-friendly!
> >>> As you found out, cups-bsd is just a port of LPR programs to CUPS.
> >>>
> >>>> But I still don't know how to specify my network printer.
> >>> I'm not familiar at all with LPR, but I know a printcap entry for the
> >>> printer is created (if it's currently connected via USB) by the
> >>> driver's postinst somewhere under /opt/Brother; according to the
> >>> printcap manpage, you'd have to edit the "lp" option -- the
> >>> description says "local printer device, or port@host for remote"!
> >> Presumeably that would be port 515 at whatever the IP number for the
> >> printer is. Will try that wen I'm home near the priniter again.
> >>
> >> And what's there in the way of termcap is a shell script
> >> /opt/brother/Printers/hl3170cdw/inf/setupPrintcapij that creates a
> >> termcap. I hope it will get executed at the right time. At bootup,
> >> perhaps?
> >>
> >> I'll see when I'm home again.
> > Hand-edited /etc/termcap:
> > root@notlookedfor:/home/hendrik# cat /etc/printcap
> > HL3170CDW:\
> > :mx=0:\
> > :sd=/var/spool/lpd/hl3170cdw:\
> > :sh:\
> > :lp=515@172.25.1.122:\
> > :if=/opt/brother/Printers/hl3170cdw/lpd/filterhl3170cdw:
> > root@notlookedfor:/home/hendrik#
> >
> > Now I get
> >
> > hendrik@notlookedfor:~$ lpr -h -PHL3170CDW Documents/math/Librationism=1407.3877v3.ps
> > lpr: cannot open /var/spool/lpd/hl3170cdw/.seq: Permission denied
> > hendrik@notlookedfor:~$
> >
> > This happens even if I run as root:
> >
> > root@notlookedfor:/home/hendrik# lpr -h -PHL3170CDW Documents/math/Librationism=1407.3877v3.ps
> > lpr: cannot open /var/spool/lpd/hl3170cdw/.seq: Permission denied
> > root@notlookedfor:/home/hendrik#
> >
> > That directory is owned by the lp daemon:
> >
> > oot@notlookedfor:/home/hendrik# ls -al /var/spool/lpd/hl3170cdwtotal 8
> > drwx------ 2 daemon lp 4096 Oct 5 14:40 .
> > drwxr-xr-x 5 root root 4096 Oct 19 09:02 ..
> > -rw------- 1 daemon lp 0 Oct 5 14:32 acct
> > -rw------- 1 daemon lp 0 Oct 5 14:32 log
> > -rw------- 1 daemon lp 0 Oct 5 14:32 status
> > -rw------- 1 daemon lp 0 Oct 5 14:32 status.pr
> > root@notlookedfor:/home/hendrik#
> >
> > and it contains no .seq file. Preumably that fle would be created as needed.
> > And presumably the permissions are checked in some way that can exclude root.
> >
> >
>
> Hi Hendrik.
>
> I can see one reason for root to be unable to get the permission:
> lpr being owned by another user than root and being suid; this is fine
> at the condidiont that this owner is 'daemon', given the owner and
> permissions of /var/spool/lpd.
>
> Didier
>
Another thing to examine: lp is the group on the directory but that directory had no write permission for the group, if I recall correctly.
RPTN
::
Re: [DNG] Printing -- now a permiss…
