:: Re: [DNG] netman: support for wlan1…
Kezdőlap
Delete this message
Reply to this message
Szerző: fsmithred
Dátum:  
Címzett: Edward Bartolo, dng
Tárgy: Re: [DNG] netman: support for wlan1, wlan2, ... and eth1, eth2, .... and new systemd's naming scheme
I can't tell from the pictures exactly what the flow is from one window to
another, but if it works out such that you can select the interface from a
list and have it auto-fill the interface name in the window that asks for
it, then you'll have one-up on wicd, which makes you type the interface name.

It would be bad if the user has to remember something like wlx78e7d1ea46da
and type it into the next window. (Or even have to remember to
copy/paste). If the auto-fill isn't possible, then I'd suggest having both
windows open so the user can look at it while they're typing.

For reference, in wicd, you can manually enter the default interface in
the gui or in a config file. Putting it into either one will automatically
add it to the other.

RE: "gnome foot' icon:
I thought the same thing, until I saw it enlarged. I think it's really a
wolverine or maybe a wolf.

-fsr


On 10/04/2015 10:41 AM, Edward Bartolo wrote:
> Hi All,
>
> These are more screenshots of the evolution of the frontend.
>
> http://postimg.org/image/enimq62sh
> http://postimg.org/image/y6n7zj1k1
> http://postimg.org/image/4g03drgkh
>
> Edward
>
> On 04/10/2015, Edward Bartolo <edbarx@???> wrote:
>> Hi David,
>>
>> The new device naming scheme will be supported. Regarding listing
>> 'lo', I was told to filter it off the list of devices. At the moment I
>> am concentrating on the frontend before I start to code support for
>> enp**** and wl****. The reason is to have a clear view of what I
>> should code in the backend.
>>
>> Edward
>>
>>
>>
>> On 04/10/2015, David Hare <davidahare@???> wrote:
>>> Some observations, testing netman.
>>>
>>> I have a (devuan-based) installation running eudev. The (usb) wireless
>>> device shows as wlan0 and netman works fine. As this machine is a fixed
>>> tower it doesn't normally need netman gui so my autostart calls this,
>>> and it works:
>>>
>>> xterm -title "Connecting to network..." -e "/usr/lib/netman/bin/backend
>>> 10"
>>>
>>> I would like to do similar before user login, maybe with an initscript.
>>>
>>> WICD and its ******* dbus reliance is now sacked for this machine.
>>>
>>> I have also live-images with eudev, unfortunately they can't use netman
>>> so far because:
>>>
>>> root@exefce:/home/user# iwconfig
>>> lo        no wireless extensions.

>>>
>>> enp5s4    no wireless extensions.

>>>
>>> enp2s0    no wireless extensions.

>>>
>>> wlp0s29f7u3  IEEE 802.11bg  ESSID:off/any
>>>            Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm
>>>            Retry short limit:7   RTS thr:off   Fragment thr:off
>>>            Encryption key:off
>>>            Power Management:on

>>>
>>> Those interfaces (except "lo") do show in netman's main window. However:
>>>
>>> wlan0: ERROR while getting interface flags: No such device
>>>
>>> ERROR: power_scan(): "/sbin/ifconfig wlan0 up" did not exit successfully
>>> (status=255).
>>>
>>> I hope this can be fixed soon. I built from latest git with
>>> dpkg-buildpackage, using the debian.tar.xz available with the netman deb
>>> package. BTW the build-deps list don't include build-essential, which
>>> was necessary although everything else was straightforward. I was a bit
>>> disturbed that they were around 900MB to install.
>>>
>>> (minor irritation) the "gnome foot" icon!
>>>
>>> David
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Dng mailing list
>>> Dng@???
>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>>>
>>