On Tue, Aug 18, 2015 at 02:19:20PM +0200, Didier Kryn wrote:
> Le 18/08/2015 12:49, Edward Bartolo a écrit :
> >At the moment I am stuck trying to use sudo to run ifup from within my
> >frontend.
> Just in case, here are a few things I know about wpa_supplicant:
>
> wpa_supplicant does ifups automatically when it connects to a wifi
> station. If an interface name is not specified in wpa_supplicant.conf, in
> the proper section of this station, it ifups the interface named "default".
>
> Therefore you shouldn't ifup yourself. You only need to fill the
> configuration files, wpa_supplicant.conf, via the control socket and
> interfaces by some method probably involving sudo.
I've not been able to figure out what that would look like.
Could you give a sample wpa_supplicant.conf and /etc/network/interfaces?
Assume the following configuration:
network 1: (WPA)
SSID = "home"
pass = "topsecret"
ip = 192.168.1.100
router = 192.168.1.0
nameserver = 8.8.8.8
network 2: (open, DHCP)
SSID = "public"
This is what I know would go in wpa_supplicant.conf:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=net
network={
ssid="home"
#psk="topsecret"
psk=c406ef685867ff2dca906a4992ab997d6ebd5c747451113c0c0ead704d859010
}
network={
ssid="public"
key_mgmt=NONE
}
::
Re: [DNG] Systemd Shims
