:: Re: [Libbitcoin] How much RAM sanct…
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Eric Voskuil
Datum:  
To: mlmikael
CC: libbitcoin
Betreff: Re: [Libbitcoin] How much RAM sanction for fully syncing node?
I don't think you can rely on those numbers. See my Ubuntu updates here:

https://github.com/libbitcoin/libbitcoin-server/issues/76

e


On 05/19/2015 01:04 AM, mlmikael wrote:
> Hi Eric,
>
> Thanks a lot for your response -
>
> So startup peaks ~1GB independent of blockchain size, however some of
> that could be offloaded to swap.
>
> The resident RAM consumption after that is made up of libBitcoin's
> internal mempool and that one is ~~100MB,
>
> so a sanctions ~1.2GB resident RAM for the v2 node should be safe,
> though really 100-200MB is the more correct figure after startup?
>
>
> Am all with you that everything about LibBitcoin and BitcoinD is
> different altogether.
>
> Some OS environments have max OS process resident RAM size limits and
> virtual memory limits (ulimit) and take down the process or make malloc
> return NULL, leading to c++ heap overflow exception or worse, so it's
> good to have an idea here.
>
> Thanks!
> Mlmikael
>
>
> On 2015-05-19 11:36, Eric Voskuil wrote:
>> Hi,
>>
>> There is not specific number for minimum required required RAM. If you
>> are low enough on RAM then the process will page virtual memory.
>> Depending on what that is being used for this can really slow things
>> down or have a minimal effect. If you run out of swap space you should
>> see an exception bring the process down (which is intended behavior).
>> I'd like to give better info, but that's what we have right now.
>>
>> There is no relationship between the implementation of libbitcoin and
>> bitcoind. Libbitcoin uses memory-mapped I/O, optimized for fast query
>> response but not conservative use of memory. It's an intentional
>> trade-off. The various data files are mapped into memory and can claim
>> as much as they do on disk. However this will most certainly be virtual
>> memory, so it has nothing to do with the amount of hardware RAM
>> available.
>>
>> I've uploaded some resource snapshots one of my built test platforms:
>>
>> https://github.com/libbitcoin/libbitcoin-server/issues/76
>>
>> This is after doing some work today to manage thread priorities, which I
>> am in the process of merging. That helps quite a bit with CPU hogging.
>> As you can see CPU and network are typically pretty reasonable. This
>> makes it possible to sync and still use the machine.
>>
>> Private bytes sort of represents the memory (excluding memory mapped I/O
>> for the data files and binaries) that the process is claiming. As you
>> can see this spikes to around 1GB when starting up. It can also climb
>> over time as the mempool is filling up but drops down significantly once
>> blocks are identified to consume those transactions.
>>
>> Also notice that this amount tends to plateau. This is probably the
>> result of hitting maximums for the mempool, not some memory limit
>> imposed in code. This machine has 8GB RAM, so this 1GB+ amount is not
>> actually a significant issue. I've seen this number stay in the
>> 50KB-100KB range for some time.
>>
>> I see no unexpected behavior in the logs, although the lack of
>> header-first sync certainly consumes some time and memory (due to the
>> receipt of blocks and transactions before they can be connected to the
>> chain). I believe the blocking issues in the 330k range is resolved. I
>> had misparameterized the libbitcoin-consensus library. The OpenSSL issue
>> is worked around in the consensus lib, so we should not have to worry
>> about that until the next OpenSSL update.
>>
>> We are working now to see if there is any actual issue remaining.
>> Working off and an I've synced 270,000 blocks today and it's moving
>> along as I would expect.
>>
>> e
>>
>> On 05/18/2015 10:34 AM, mlmikael wrote:
>>> Hi!
>>>
>>> How much (resident) RAM should be sanctioned for a fully syncing v2
>>> node?
>>>
>>> Is the RAM use here proportionate to the amount of parallellism in the
>>> syncing work (if so a configurable upper limit possible)?
>>>
>>> BitcoinD required ~700MB last I checked.
>>>
>>> Thanks!
>>> Mlmikael
>>>
>>> _______________________________________________
>>> Libbitcoin mailing list
>>> Libbitcoin@???
>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>