:: [Dng] Fwd: [dng] vdev status updat…
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Jude Nelson
Ημερομηνία:  
Προς: dng@lists.dyne.org
Αντικείμενο: [Dng] Fwd: [dng] vdev status update
It just occurred to me that my reply wasn't CC'ed to the ML.

---------- Forwarded message ----------
From: Jude Nelson <judecn@???>
Date: Tue, Apr 14, 2015 at 2:12 PM
Subject: Re: [Dng] [dng] vdev status update
To: Anto <aryanto@???>


Hi Anto, thank you for giving that a try!


> I am not sure if at this stage, it is worth it to report the problems that
> I have just experienced.
>


Actually, every bit of feedback helps :)


>
> I followed your 3 steps instruction to have vdev on the PC that I am
> currently using for writing this email (HP EliteBook 8530w), and
> surprisingly it does not work (yet) :)



> Before anyone ask: no, this is not a "production" PC as I have been
> beating it up so bad in the last 3 years since I got it used from the
> company I work for.
>
> In the grub.cfg, I used the same set of files as the ones from the running
> kernel generated by update-initramfs, except the initrd that I took from
> the "example" directory under vdev source directory.
>
> It booted the initrd, but just ended up on the (initramfs) prompt. It is
> hard to get the error messages during boot. I tried to record them using my
> mobile phone and the messages at the beginning are the following:
>
> Loading, please wait...
> /init:  line 175:  resolve_device:  not found
> 00071:859055872:  [          vdev.c:0425]  vdev_init:  ERROR:
> vdev_config_load('/etc/vdev/vdevd.conf')  rc = -2
> 00071:859055872:  [         main.c:0042]  main:  ERROR:  vdev_init rc = -2

>
> <some messages that are too fast to be captured>
>


It looks like the config file didn't get installed to the right place.
Upon further inspection, it looks like I forgot to have the Makefile
install the vdev init script as well (I had installed it manually in my
VM). I'll add "create a generic device manager init script that works with
udev, vdev, mdev, and static /dev" to my TODO list :)

I pushed a fix to both git.devuan.org and github.com, if you're anxious to
try it again (I tested it insofar as ensuring that it generates /etc/vdev
properly, and it installs the vdev init script and removes the udev script
links from /etc/rcS.d). I haven't tested it on my VM yet, though.

Thanks again for giving this a go!

-Jude


> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>