:: Re: [Dng] Why daemontools is so coo…
Top Pagina
Delete this message
Reply to this message
Auteur: devuan.kn
Datum:  
Aan: dng
Onderwerp: Re: [Dng] Why daemontools is so cool
Hi Jude, hello Isaac,

I did express myself poorly when I spoke of hardware detection. You
both are fully correct to call me out on that. Yes, hardware detection
happens in the kernel, and indeed some of it is done in parallel
there.

I was thinking about all the user-space tools that scan drives and
create new devices based on their findings when writing this mail.
These little things like btrfs scan, lvm --forgot-the-parameter,
cryptsetup open, and the others that allow you to do cool things with
your filesystems.

Sorry for the confusion this caused and my poor choice of words.

On Tue, Mar 31, 2015 at 12:05 AM, Jude Nelson - judecn@???
<devuan.kn.ae5676beef.judecn#gmail.com@???> wrote:
<snip>

> If your boot sequence is taking too long because it's loading unnecessary
> drivers, then your boot sequence is misconfigured.


If you need to generically support a wide range of setups and include
the fun stuff listed above into the mix, then your init system will
need to do a lot more than what is necessary to bring up one
individual system. Debian did run all of the above during its boot
sequence (if the package was installed), just in case somebody
actually went ahead and used it.

>> And some hardware can take a very
>> long time to register, so you need to be generous with those
>> time-outs. On the other hand anybody without the hardware will stuck
>> for the entire timeout, so you need to keep them as short as possible.
>
> If your hardware is taking a long time to spin up, it's due to bug in either
> the hardware or its driver, not the boot sequence.


Dependencies enable you to have a robust boot sequence even with
hardware like this.

> Again, if you're talking about waiting for the device with your root
> filesystem, the boot process is *supposed* to block until it's ready. Boot
> cannot proceed until the root device is found and mounted; otherwise you
> obviously cannot load programs. This process cannot be sped up through
> parallelization (Amdahl's Law and all that). Same goes for programs that
> cannot be started until /usr is mounted (if you have a separate /usr).


I think I poorly worded my original mail.

Please let me try again:

If you want to support a wide range of combinations of all the goodies
Linux comes with, incl. software raid, logical volume management, disk
encryption and any combination thereof, then you can not do so in a
generic way using a strictly sequential init system. You can configure
all of these for each individual system, but you can not have generic
support for all of them in any valid combination in your distribution.

You will also need to introduce timeouts (which are either too short
or too long, depending on the system) into each and every step along
the way.

This is all about file system detection. Once everything is mounted,
it is still rather easy to run into trouble with services not being
fully up even though their start script finished, network not being
there yet and whatnot. But that is a entirely different issue.

<snip>

>> The killer argument for parallel startup with dependency handling is
>> robustness, not speed.
>
> No, the opposite is true. Programs with multiple instances of execution
> (processes, threads, coroutines) in practice tend to be much more
> error-prone, because they are much harder to reason about. This is because
> the number of states such a program can be in increases with the *factorial*
> of the number of instances of execution it has. This is such a problem that
> determinism is often a design requirement for mission-critical software
> whose failure will result in huge costs and/or loss of life.


I think I missed something here;-)

My point is "A init system should be robust to work with any valid
configuration I can put the system in" and I understand your reply to
be "Complexity makes programs less robust". I agree with both
statement and see no contradiction whatsoever.

>> Maybe it is my tendency to mess around with cryptsetup and co. that
>> gets me into trouble, but I did have unbootable systems with sysv-init
>> due to "unexpected setup" problems. Nothing I could not fix, but still
>> an annoyance that I would be happy to get rid of.
>
> Parallel boot won't fix misconfigurations you introduced by messing around
> with it.


If I can mount a filesystem manually, then it is not misconfigured. I
do expect my init system to also be able to bring up that filesystem
-- provided I hand it all the necessary data (keys, etc.) and that it
can handle all the individual pieces of software that I used when
setting up that filesystem.

A strictly sequential boot is not able to do that in a generic way.
You can configure *your* system to do that by tweaking the sequence,
but it is impossible for a distribution to ship a sequential init
system that can robustly set up any filesystem that you can mount
manually.

That is a severe limitation of sequential init system and one that a
distribution needs to be aware of.

>> The whole consecutive boot thing hinges on timeouts and that is
>> neither generic nor robust.
>
> The boot sequence does *not* hinge on timeouts. If anything, timeouts are a
> fallback mechanism for working around other programs not making forward
> progress (i.e. due to bugs, a down network, or faulty hardware). If your
> boot sequence is encountering timeouts, then something's wrong with your
> boot sequence.


A *generic* consecutive boot sequence does. You can tweak the setup
for your system so that it does not (or it least does less), but you
can not ship one system that supports all (or at least most) valid
combinations of filesystem setups and does not heavily rely on
timeouts.

BR
Karl