:: Re: [Libbitcoin] trying offline obe…
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Grazcoin
Datum:  
To: libbitcoin
Betreff: Re: [Libbitcoin] trying offline obelisk
This version seems to work fine offline on ubuntu 13.10, so I have an
offline obelisk that I can play with :)
Thanks you Amir!

Now the question is how to update the setup while staying offline. For
security reasons, I would like to update it using a CD/DVD. I thought I
would tar the updated files from the blockchain directory and overwrite
that directory on my offline setup, e.g:
cd worker
tar cz `find blockchain -type f -newermt "Mar 23"` -f
~/blockchain-update-20140326.tgz

But I get way too many files (probably also old files get a newer
timestamp), so even a DVD is not enough for 3 days.
Any idea of how to do it in a simple and reasonably optimized way?

Grazcoin


On 2014-03-24 22:58, Grazcoin wrote:
> No problems till now after this change.
> Thanks!
>
> On 2014-03-24 21:27, Amir Taaki wrote:
>> https://github.com/spesmilo/libbitcoin/commit/d73e6f03771c6e5e4ced166151d99f352da0b626
>>
>> new connections are limited to 10 per second now. if this is too low then
>> we should lower the time interval rather than the connection limit.
>>
>>> I was too fast on the "Fix verified" trigger.
>>> The assert comes in the same virtual box setup a little later, e.g.
>>> after 10 times of running:
>>> sx fetch-transaction
>>> fe28050b93faea61fa88c4c630f0e1f0a1c24d0082dd0e10d369e13212128f33
>>> (it is a tx from block 1000)
>>> This is the case for both the commit that I claimed to be "Fix
>>> verified", and for the HEAD.
>>> Grazcoin
>>>
>>> On 2014-03-23 17:42, Grazcoin wrote:
>>>> Fix verified on the virtual box setup :)
>>>> It required a fresh build (running again install-sx.sh did not fix the
>>>> problem).
>>>>
>>>> Thanks!
>>>> Grazcoin
>>>>
>>>> On 2014-03-22 15:26, Amir Taaki wrote:
>>>>> Fixed:
>>>> https://github.com/spesmilo/libbitcoin/commit/9104dfa1661fcc2e61a576de446ad7e0771e74e8
>>>>
>>>>> On 21/03/14 11:24, Grazcoin wrote:
>>>>>> I reproduced the bug on the virtual box image.
>>>>>>
>>>>>> 1. I followed the image installation instructions that I gave
>>>> previously
>>>>>> on this thread.
>>>>>> 2. I ran install-sx.sh script of master git HEAD.
>>>>>> 3. created ~/worker/blockchain and ran sx initchain
>>>>>> 4. ran obworker (it took ~2 minutes for obworker to start connecting
>>>> though)
>>>>>> 5. I waited until block 3136, the stopped obworker.
>>>>>> 6. ifconfig eth0 down to disable networking (don't try the service
>>>>>> networking stop, since that kills the vm)
>>>>>> 7. .sx.cfg change to service = "tcp://127.0.0.1:9091"
>>>>>> 8. started again obworker (same output like reported in bug)
>>>>>> 9. sx fetch-last-height returns 3136 (a little too slow for my
>>>> taste).
>>>>>> 10. repeat 6 times, and them *boom* - assertion socket.self() like in
>>>>>> original bug description.
>>>>>>
>>>>>> On 2014-03-20 20:09, Thomas Hartman wrote:
>>>>>>> Sounds like a legitimate problem. Created issue in bugtracker,
>>>> linked
>>>>>>> back to this discussion.
>>>>>>>
>>>>>>> https://github.com/spesmilo/sx/issues/50
>>>>>>>
>>>>>>> On Thu, Mar 20, 2014 at 10:07 AM, Grazcoin <grazcoin@???>
>>>> wrote:
>>>>>>>> You can use virtualbox for testing ubuntu using console.
>>>>>>>> I verified the procedure myself (at least until running the sx
>>>> install
>>>>>>>> script).
>>>>>>>>
>>>>>>>> Instructions:
>>>>>>>> 1. download (less than 1GB)
>>>>>>>>
>>>> http://virtualboximages.com/Ubuntu+13.10+amd64+VirtualBox+VDI+Virtual+Appliance
>>>>>>>> 2. unrar e
>>>>>>>>
>>>> VirtualBox_-_Ubuntu-13.10-amd64-Desktop_VDI-[VirtualBoxImages.com].rar
>>>>>>>> 3. start virtualbox (I assume it is installed).
>>>>>>>> 4. New (name obelisk), Next.
>>>>>>>> 5. RAM - I gave 4GB, Next
>>>>>>>> 6. Use an existing virtual hard drive file - choose
>>>>>>>> ubuntu-13.10-desktop-amd64.vdi
>>>>>>>> 7. Start machine
>>>>>>>> 8. sudo su (password is adminuser)
>>>>>>>> 9. apt-get update
>>>>>>>> 10. apt-get install git
>>>>>>>> 11. git clone https://github.com/spesmilo/sx.git
>>>>>>>> 12. sh sx/install-sx.sh
>>>>>>>>
>>>>>>>> to stop and start networking
>>>>>>>> service networking stop
>>>>>>>> service networking start
>>>>>>>>
>>>>>>>> I hope it helps :)
>>>>>>>> Grazcoin
>>>>>>>>
>>>>>>>>
>>>>>>>> On 2014-03-19 22:17, Amir Taaki wrote:
>>>>>>>>> hey I'll take a look soon. I just accidentally shut off my server
>>>> today
>>>>>>>>> when connected via ssh and tries to shut down the networking. doh
>>>>>>>>>
>>>>>>>>> On 19/03/14 21:36, Thomas Hartman wrote:
>>>>>>>>>> my guess would be that libbitcoin might be the component with
>>>>>>>>>> lingering libs. so you might need to "nuke" that more thoroughly.
>>>>>>>>>>
>>>>>>>>>> On Wed, Mar 19, 2014 at 1:35 PM, Thomas Hartman
>>>>>>>>>> <thomas@???> wrote:
>>>>>>>>>>> shot in the dark, but
>>>>>>>>>>>
>>>>>>>>>>> $ make clean
>>>>>>>>>>>
>>>>>>>>>>> and then run install-sx again?
>>>>>>>>>>>
>>>>>>>>>>> Sounds like some library component still might have old code.
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Mar 19, 2014 at 11:12 AM, Grazcoin <grazcoin@???>
>>>> wrote:
>>>>>>>>>>>> I was using the install-sx.sh script cloned today which updates
>>>> anyway
>>>>>>>>>>>> all sources, so I am in HEAD on all components (libbitcoin,
>>>> libwallet,
>>>>>>>>>>>> obelisk, sx, czmqpp, czmq, etc).
>>>>>>>>>>>> If you give me some hints or debug instructions, I could try to
>>>> fix it
>>>>>>>>>>>> myself.
>>>>>>>>>>>> I am working with ubuntu 13.10
>>>>>>>>>>>>
>>>>>>>>>>>> On 2014-03-19 18:25, Amir Taaki wrote:
>>>>>>>>>>>>> czmqpp-gitUpdate Obelisk and libczmq++
>>>>>>>>>>>>> I fixed this a few days ago but should work now.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 19/03/14 17:22, Grazcoin wrote:
>>>>>>>>>>>>>> I decided to give the latest obelisk a try on ubuntu with
>>>> offline usage.
>>>>>>>>>>>>>> It works already partially.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Starting from a normal setup with network - everything works
>>>> fine.
>>>>>>>>>>>>>> Turning off networking.
>>>>>>>>>>>>>> # service networking stop
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Start worker
>>>>>>>>>>>>>> ubuntu@bitcoin:~/worker1$ obworker
>>>>>>>>>>>>>> Using config file: /etc/obelisk/worker.cfg
>>>>>>>>>>>>>> Press CTRL-C to shut down.
>>>>>>>>>>>>>> DEBUG [worker]: Listening: tcp://*:9091
>>>>>>>>>>>>>> INFO [worker]: worker ready
>>>>>>>>>>>>>> DEBUG [worker]: Heartbeat: tcp://*:9092
>>>>>>>>>>>>>> ERROR [protocol]: Failed to start handshake service: Bad
>>>> stream
>>>>>>>>>>>>>> Node started.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Then send a request
>>>>>>>>>>>>>> ubuntu@bitcoin:~/worker1$ sx fetch-last-height
>>>>>>>>>>>>>> 291345
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> great! it works!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Then a second request
>>>>>>>>>>>>>> ubuntu@bitcoin:~/worker1$ sx fetch-last-height
>>>>>>>>>>>>>> oh ...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I get:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> obworker: worker/worker.cpp:29: void
>>>>>>>>>>>>>> obelisk::send_worker::queue_send(const
>>>> obelisk::outgoing_message&):
>>>>>>>>>>>>>> Assertion `socket.self()' failed.
>>>>>>>>>>>>>> Aborted (core dumped)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I use the master HEAD.
>>>>>>>>>>>>>> This behavior is repeatable.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Quick fix?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 2014-01-31 20:35, Grazcoin wrote:
>>>>>>>>>>>>>>> I tried it on the latest ubuntu...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 2014-01-31 20:34, Thomas Hartman wrote:
>>>>>>>>>>>>>>>> I don't know the answer to your question, but what distro
>>>> are you running?
>>>>>>>>>>>>>>>> It ran out of the box for me on debian 7.1 but not on
>>>> latest ubuntu.
>>>>>>>>>>>>>>>> On Jan 31, 2014, at 6:05 AM, Grazcoin wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I was trying to test the functioning of obelisk offline:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 1. started with a normal working online updated setup.
>>>>>>>>>>>>>>>>> 2. stopped the obworker and obbalancer.
>>>>>>>>>>>>>>>>> 3. updated /usr/local/etc/obelisk/worker.cfg with
>>>> outgoing-connections = 0 and listener_enabled = false
>>>>>>>>>>>>>>>>> 4. tried to start obworker, and got a crash. No extra info
>>>> on the error.log
>>>>>>>>>>>>>>>>> What is the correct config to make this work?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> git is in sync.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [jan-31 14:57:29] dev@dev-laptop:~/worker1$ obworker
>>>>>>>>>>>>>>>>> Using config file: /usr/local/etc/obelisk/worker.cfg
>>>>>>>>>>>>>>>>> Press CTRL-C to shut down.
>>>>>>>>>>>>>>>>> DEBUG [worker]: Connecting: tcp://localhost:9092
>>>>>>>>>>>>>>>>> INFO [worker]: worker ready
>>>>>>>>>>>>>>>>> ERROR [protocol]: Failed to start handshake service: Bad
>>>> stream
>>>>>>>>>>>>>>>>> ERROR: Unable to start session: Bad stream
>>>>>>>>>>>>>>>>> terminate called without an active exception
>>>>>>>>>>>>>>>>> Aborted (core dumped)
>>>>>>>>>>>>>>>>> [jan-31 14:57:39] dev@dev-laptop:~/worker1$ cat
>>>> /usr/local/etc/obelisk/worker.cfg
>>>>>>>>>>>>>>>>> # Debug messages output file.
>>>>>>>>>>>>>>>>> output-file = "debug.log"
>>>>>>>>>>>>>>>>> # Error messages output file.
>>>>>>>>>>>>>>>>> error-file = "error.log"
>>>>>>>>>>>>>>>>> # Path to blockchain directory.
>>>>>>>>>>>>>>>>> blockchain-path = "./blockchain/"
>>>>>>>>>>>>>>>>> # List of hosts (loaded on startup, saved on exit).
>>>>>>>>>>>>>>>>> # If non-existant or empty then Obelisk/libbitcoin will
>>>>>>>>>>>>>>>>> # fall back to trying seed nodes instead.
>>>>>>>>>>>>>>>>> hosts-file = "hosts"
>>>>>>>>>>>>>>>>> # Next 2 values ignored if publisher is disabled
>>>>>>>>>>>>>>>>> publisher_enabled = false
>>>>>>>>>>>>>>>>> block-publish = "tcp://*:9093"
>>>>>>>>>>>>>>>>> tx-publish = "tcp://*:9094"
>>>>>>>>>>>>>>>>> # Connection to the balancer.
>>>>>>>>>>>>>>>>> # Which port to connect to the load balancer on.
>>>>>>>>>>>>>>>>> service = "tcp://localhost:9092"
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> # Advanced features:
>>>>>>>>>>>>>>>>> # Uncomment to give this worker a named UUID. Must be
>>>> unique.
>>>>>>>>>>>>>>>>> #name = "ada"
>>>>>>>>>>>>>>>>> # Number of outgoing network connections to p2p network.
>>>>>>>>>>>>>>>>> outgoing-connections = 0
>>>>>>>>>>>>>>>>> # Listening for incoming connections.
>>>>>>>>>>>>>>>>> listener_enabled = false
>>>>>>>>>>>>>>>>> # Add manual outgoing nodes below.
>>>>>>>>>>>>>>>>> #nodes = (
>>>>>>>>>>>>>>>>> # ("localhost", 8333)
>>>>>>>>>>>>>>>>> #)
>>>>>>>>>>>>>>>>> # Show Obelisk requests in the log file for debugging or
>>>> security.
>>>>>>>>>>>>>>>>> # Slows down Obelisk speed. Disabled by default.
>>>>>>>>>>>>>>>>> #log_requests = true
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> Libbitcoin mailing list
>>>>>>>>>>>>>>>>> Libbitcoin@???
>>>>>>>>>>>>>>>>>
>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Libbitcoin mailing list
>>>>>>>>>>>>>>> Libbitcoin@???
>>>>>>>>>>>>>>>
>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Libbitcoin mailing list
>>>>>>>>>>>>>> Libbitcoin@???
>>>>>>>>>>>>>>
>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Libbitcoin mailing list
>>>>>>>>>>>>> Libbitcoin@???
>>>>>>>>>>>>>
>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Libbitcoin mailing list
>>>>>>>>>>>> Libbitcoin@???
>>>>>>>>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Libbitcoin mailing list
>>>>>>>>>> Libbitcoin@???
>>>>>>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Libbitcoin mailing list
>>>>>>>>> Libbitcoin@???
>>>>>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>>> _______________________________________________
>>>>>>>> Libbitcoin mailing list
>>>>>>>> Libbitcoin@???
>>>>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>> _______________________________________________
>>>>>> Libbitcoin mailing list
>>>>>> Libbitcoin@???
>>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>>>>
>>>>
>>>>> _______________________________________________
>>>>> Libbitcoin mailing list
>>>>> Libbitcoin@???
>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>> _______________________________________________
>>>> Libbitcoin mailing list
>>>> Libbitcoin@???
>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>> _______________________________________________
>>> Libbitcoin mailing list
>>> Libbitcoin@???
>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>>>
>> _______________________________________________
>> Libbitcoin mailing list
>> Libbitcoin@???
>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> _______________________________________________
> Libbitcoin mailing list
> Libbitcoin@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin