:: Re: [Libbitcoin] trying offline obe…
Inizio della pagina
Delete this message
Reply to this message
Autore: Grazcoin
Data:  
To: libbitcoin
Oggetto: Re: [Libbitcoin] trying offline obelisk
I was too fast on the "Fix verified" trigger.
The assert comes in the same virtual box setup a little later, e.g.
after 10 times of running:
sx fetch-transaction
fe28050b93faea61fa88c4c630f0e1f0a1c24d0082dd0e10d369e13212128f33
(it is a tx from block 1000)
This is the case for both the commit that I claimed to be "Fix
verified", and for the HEAD.
Grazcoin

On 2014-03-23 17:42, Grazcoin wrote:
> Fix verified on the virtual box setup :)
> It required a fresh build (running again install-sx.sh did not fix the
> problem).
>
> Thanks!
> Grazcoin
>
> On 2014-03-22 15:26, Amir Taaki wrote:
> > Fixed:
>
>
> https://github.com/spesmilo/libbitcoin/commit/9104dfa1661fcc2e61a576de446ad7e0771e74e8
>
> > On 21/03/14 11:24, Grazcoin wrote:
> >> I reproduced the bug on the virtual box image.
> >>
> >> 1. I followed the image installation instructions that I gave
> previously
> >> on this thread.
> >> 2. I ran install-sx.sh script of master git HEAD.
> >> 3. created ~/worker/blockchain and ran sx initchain
> >> 4. ran obworker (it took ~2 minutes for obworker to start connecting
> though)
> >> 5. I waited until block 3136, the stopped obworker.
> >> 6. ifconfig eth0 down to disable networking (don't try the service
> >> networking stop, since that kills the vm)
> >> 7. .sx.cfg change to service = "tcp://127.0.0.1:9091"
> >> 8. started again obworker (same output like reported in bug)
> >> 9. sx fetch-last-height returns 3136 (a little too slow for my taste).
> >> 10. repeat 6 times, and them *boom* - assertion socket.self() like in
> >> original bug description.
> >>
> >> On 2014-03-20 20:09, Thomas Hartman wrote:
> >>> Sounds like a legitimate problem. Created issue in bugtracker, linked
> >>> back to this discussion.
> >>>
> >>> https://github.com/spesmilo/sx/issues/50
> >>>
> >>> On Thu, Mar 20, 2014 at 10:07 AM, Grazcoin <grazcoin@???>
> wrote:
> >>>> You can use virtualbox for testing ubuntu using console.
> >>>> I verified the procedure myself (at least until running the sx
> install
> >>>> script).
> >>>>
> >>>> Instructions:
> >>>> 1. download (less than 1GB)
> >>>>
> http://virtualboximages.com/Ubuntu+13.10+amd64+VirtualBox+VDI+Virtual+Appliance
> >>>> 2. unrar e
> >>>>
> VirtualBox_-_Ubuntu-13.10-amd64-Desktop_VDI-[VirtualBoxImages.com].rar
> >>>> 3. start virtualbox (I assume it is installed).
> >>>> 4. New (name obelisk), Next.
> >>>> 5. RAM - I gave 4GB, Next
> >>>> 6. Use an existing virtual hard drive file - choose
> >>>> ubuntu-13.10-desktop-amd64.vdi
> >>>> 7. Start machine
> >>>> 8. sudo su (password is adminuser)
> >>>> 9. apt-get update
> >>>> 10. apt-get install git
> >>>> 11. git clone https://github.com/spesmilo/sx.git
> >>>> 12. sh sx/install-sx.sh
> >>>>
> >>>> to stop and start networking
> >>>> service networking stop
> >>>> service networking start
> >>>>
> >>>> I hope it helps :)
> >>>> Grazcoin
> >>>>
> >>>>
> >>>> On 2014-03-19 22:17, Amir Taaki wrote:
> >>>>> hey I'll take a look soon. I just accidentally shut off my server
> today
> >>>>> when connected via ssh and tries to shut down the networking. doh
> >>>>>
> >>>>> On 19/03/14 21:36, Thomas Hartman wrote:
> >>>>>> my guess would be that libbitcoin might be the component with
> >>>>>> lingering libs. so you might need to "nuke" that more thoroughly.
> >>>>>>
> >>>>>> On Wed, Mar 19, 2014 at 1:35 PM, Thomas Hartman
> >>>>>> <thomas@???> wrote:
> >>>>>>> shot in the dark, but
> >>>>>>>
> >>>>>>> $ make clean
> >>>>>>>
> >>>>>>> and then run install-sx again?
> >>>>>>>
> >>>>>>> Sounds like some library component still might have old code.
> >>>>>>>
> >>>>>>> On Wed, Mar 19, 2014 at 11:12 AM, Grazcoin <grazcoin@???>
> wrote:
> >>>>>>>> I was using the install-sx.sh script cloned today which updates
> anyway
> >>>>>>>> all sources, so I am in HEAD on all components (libbitcoin,
> libwallet,
> >>>>>>>> obelisk, sx, czmqpp, czmq, etc).
> >>>>>>>> If you give me some hints or debug instructions, I could try to
> fix it
> >>>>>>>> myself.
> >>>>>>>> I am working with ubuntu 13.10
> >>>>>>>>
> >>>>>>>> On 2014-03-19 18:25, Amir Taaki wrote:
> >>>>>>>>> czmqpp-gitUpdate Obelisk and libczmq++
> >>>>>>>>> I fixed this a few days ago but should work now.
> >>>>>>>>>
> >>>>>>>>> On 19/03/14 17:22, Grazcoin wrote:
> >>>>>>>>>> I decided to give the latest obelisk a try on ubuntu with
> offline usage.
> >>>>>>>>>> It works already partially.
> >>>>>>>>>>
> >>>>>>>>>> Starting from a normal setup with network - everything works
> fine.
> >>>>>>>>>>
> >>>>>>>>>> Turning off networking.
> >>>>>>>>>> # service networking stop
> >>>>>>>>>>
> >>>>>>>>>> Start worker
> >>>>>>>>>> ubuntu@bitcoin:~/worker1$ obworker
> >>>>>>>>>> Using config file: /etc/obelisk/worker.cfg
> >>>>>>>>>> Press CTRL-C to shut down.
> >>>>>>>>>> DEBUG [worker]: Listening: tcp://*:9091
> >>>>>>>>>> INFO [worker]: worker ready
> >>>>>>>>>> DEBUG [worker]: Heartbeat: tcp://*:9092
> >>>>>>>>>> ERROR [protocol]: Failed to start handshake service: Bad stream
> >>>>>>>>>> Node started.
> >>>>>>>>>>
> >>>>>>>>>> Then send a request
> >>>>>>>>>> ubuntu@bitcoin:~/worker1$ sx fetch-last-height
> >>>>>>>>>> 291345
> >>>>>>>>>>
> >>>>>>>>>> great! it works!
> >>>>>>>>>>
> >>>>>>>>>> Then a second request
> >>>>>>>>>> ubuntu@bitcoin:~/worker1$ sx fetch-last-height
> >>>>>>>>>> oh ...
> >>>>>>>>>>
> >>>>>>>>>> I get:
> >>>>>>>>>>
> >>>>>>>>>> obworker: worker/worker.cpp:29: void
> >>>>>>>>>> obelisk::send_worker::queue_send(const
> obelisk::outgoing_message&):
> >>>>>>>>>> Assertion `socket.self()' failed.
> >>>>>>>>>> Aborted (core dumped)
> >>>>>>>>>>
> >>>>>>>>>> I use the master HEAD.
> >>>>>>>>>> This behavior is repeatable.
> >>>>>>>>>>
> >>>>>>>>>> Quick fix?
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> On 2014-01-31 20:35, Grazcoin wrote:
> >>>>>>>>>>> I tried it on the latest ubuntu...
> >>>>>>>>>>>
> >>>>>>>>>>> On 2014-01-31 20:34, Thomas Hartman wrote:
> >>>>>>>>>>>> I don't know the answer to your question, but what distro
> are you running?
> >>>>>>>>>>>>
> >>>>>>>>>>>> It ran out of the box for me on debian 7.1 but not on
> latest ubuntu.
> >>>>>>>>>>>> On Jan 31, 2014, at 6:05 AM, Grazcoin wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>> I was trying to test the functioning of obelisk offline:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> 1. started with a normal working online updated setup.
> >>>>>>>>>>>>> 2. stopped the obworker and obbalancer.
> >>>>>>>>>>>>> 3. updated /usr/local/etc/obelisk/worker.cfg with
> outgoing-connections = 0 and listener_enabled = false
> >>>>>>>>>>>>> 4. tried to start obworker, and got a crash. No extra info
> on the error.log
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> What is the correct config to make this work?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> git is in sync.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> [jan-31 14:57:29] dev@dev-laptop:~/worker1$ obworker
> >>>>>>>>>>>>> Using config file: /usr/local/etc/obelisk/worker.cfg
> >>>>>>>>>>>>> Press CTRL-C to shut down.
> >>>>>>>>>>>>> DEBUG [worker]: Connecting: tcp://localhost:9092
> >>>>>>>>>>>>> INFO [worker]: worker ready
> >>>>>>>>>>>>> ERROR [protocol]: Failed to start handshake service: Bad
> stream
> >>>>>>>>>>>>> ERROR: Unable to start session: Bad stream
> >>>>>>>>>>>>> terminate called without an active exception
> >>>>>>>>>>>>> Aborted (core dumped)
> >>>>>>>>>>>>> [jan-31 14:57:39] dev@dev-laptop:~/worker1$ cat
> /usr/local/etc/obelisk/worker.cfg
> >>>>>>>>>>>>> # Debug messages output file.
> >>>>>>>>>>>>> output-file = "debug.log"
> >>>>>>>>>>>>> # Error messages output file.
> >>>>>>>>>>>>> error-file = "error.log"
> >>>>>>>>>>>>> # Path to blockchain directory.
> >>>>>>>>>>>>> blockchain-path = "./blockchain/"
> >>>>>>>>>>>>> # List of hosts (loaded on startup, saved on exit).
> >>>>>>>>>>>>> # If non-existant or empty then Obelisk/libbitcoin will
> >>>>>>>>>>>>> # fall back to trying seed nodes instead.
> >>>>>>>>>>>>> hosts-file = "hosts"
> >>>>>>>>>>>>> # Next 2 values ignored if publisher is disabled
> >>>>>>>>>>>>> publisher_enabled = false
> >>>>>>>>>>>>> block-publish = "tcp://*:9093"
> >>>>>>>>>>>>> tx-publish = "tcp://*:9094"
> >>>>>>>>>>>>> # Connection to the balancer.
> >>>>>>>>>>>>> # Which port to connect to the load balancer on.
> >>>>>>>>>>>>> service = "tcp://localhost:9092"
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> # Advanced features:
> >>>>>>>>>>>>> # Uncomment to give this worker a named UUID. Must be
> unique.
> >>>>>>>>>>>>> #name = "ada"
> >>>>>>>>>>>>> # Number of outgoing network connections to p2p network.
> >>>>>>>>>>>>> outgoing-connections = 0
> >>>>>>>>>>>>> # Listening for incoming connections.
> >>>>>>>>>>>>> listener_enabled = false
> >>>>>>>>>>>>> # Add manual outgoing nodes below.
> >>>>>>>>>>>>> #nodes = (
> >>>>>>>>>>>>> # ("localhost", 8333)
> >>>>>>>>>>>>> #)
> >>>>>>>>>>>>> # Show Obelisk requests in the log file for debugging or
> security.
> >>>>>>>>>>>>> # Slows down Obelisk speed. Disabled by default.
> >>>>>>>>>>>>> #log_requests = true
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>> Libbitcoin mailing list
> >>>>>>>>>>>>> Libbitcoin@???
> >>>>>>>>>>>>>
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>>>>>>>>> _______________________________________________
> >>>>>>>>>>> Libbitcoin mailing list
> >>>>>>>>>>> Libbitcoin@???
> >>>>>>>>>>>
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> Libbitcoin mailing list
> >>>>>>>>>> Libbitcoin@???
> >>>>>>>>>>
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>>>>>>>>
> >>>>>>>>> _______________________________________________
> >>>>>>>>> Libbitcoin mailing list
> >>>>>>>>> Libbitcoin@???
> >>>>>>>>>
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>>>>>> _______________________________________________
> >>>>>>>> Libbitcoin mailing list
> >>>>>>>> Libbitcoin@???
> >>>>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>>>> _______________________________________________
> >>>>>> Libbitcoin mailing list
> >>>>>> Libbitcoin@???
> >>>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Libbitcoin mailing list
> >>>>> Libbitcoin@???
> >>>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>>> _______________________________________________
> >>>> Libbitcoin mailing list
> >>>> Libbitcoin@???
> >>>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>
> >> _______________________________________________
> >> Libbitcoin mailing list
> >> Libbitcoin@???
> >> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
> >>
>
>
>
> > _______________________________________________
> > Libbitcoin mailing list
> > Libbitcoin@???
> > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin
>
>
> _______________________________________________
> Libbitcoin mailing list
> Libbitcoin@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/libbitcoin