:: Re: [dyne:bolic] live boot problems
トップ ページ
このメッセージを削除
このメッセージに返信
著者: Holger Beetz
日付:  
To: dynebolic mailinglist
題目: Re: [dyne:bolic] live boot problems
In the end I can not comment on any S3-based GPUs but NVidia will
cause problems with the vanilla dyne3 CD until Jaromil steps in and
releases a new build both with a newer Kernel and a newer Mesa
version. AFAIK he also wanted to add a Xorg framebuffer configuration
as fallback which should work pretty much with any hardware out there.

Until then you need to use the nomodeset kernel param to disable Novueau so far.

HTH,
Holger

2012/5/21 Holger Beetz <holger.beetz@???>:
> Hm, strange...if Trisquel works fine I would expect that dyne works also.
>
> For NVidia cards I use nouveau.nomodeset=1 or nomodeset=1 as boot
> parameter (you have to change the boot commandline by hand during
> booting).
> Check the dyne mailing list archive for details.
>
> I posted it somewhere....
>
> 2012/5/21 Quiliro Ordóñez <quiliro@???>:
>> El 20/05/12 13:40, Holger Beetz escribió:
>>
>>> what graphic adapters did they have?
>>
>>
>> One of them is S3 UniChrome Pro. All those machines worked well with
>> Trisquel and the ones I tested with Ututo and Parabola also did.
>>
>>
>>> for me with nvidia i had to use a specific kernel parameter
>>
>>
>> What parameter did you use? How to know what parameters to use?
>>
>>
>> --
>> Saludos libres,
>>
>> Quiliro Ordóñez
>> (593)2-253 5534
>> (593)2-340 1517
>> (593)9-675 9641
>>
>> _______________________________________________
>> dynebolic mailing list
>> dynebolic@???
>> http://lists.dyne.org/mailman/listinfo/dynebolic