:: [dyne:bolic] Driver
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Pablo Ferreira
Datum:  
To: dynebolic
Betreff: [dyne:bolic] Driver

Hello/hola

I`ve realised that when i run alsamixer, de audio card is the C-Media, but the sound comes from de input of the card, and i'm not able to change de volume. I can't understand why if the alsa detector of audio devices don't detect supported pci audio cards, why appears de CMI in the alsamixer?

I try to upgrade alsa drivers but i couldn't, when i execute ./config --with-kernel=$DYNE_SYS_MNT/SDK/sys it tells me that alsa is built-in the kernel

When I execute ./config --with-alsakernel=$DYNE_SYS_MNT/SDK/sys it don't find the folder with the version.(i think si de version of the kernel)

En Castellano:
Me di cuenta que cuando corro el alsamixer la placa que aparece ahí es la C-Media, pero el sonido sale pòr la entraada de la placa y no puedo bajar o subir el volumen. NO entiendo por que si el detector de alsa no encuentra ninguna placa soportada, aparece la C-media en el alsa mixer.

Trate de instalar una versión más nueva del paquete alsa-drivers pero no pude. Cuando ejecuto ./config --with-kernel=$DYNE_SYS_MNT/SDK/sys me dice que Alsa ya está icorporado en el kernel.

Cuando ejecuto ./config --with-alsakernel=$DYNE_SYS_MNT/SDK/sys me dice que no encuentra la carpeta con la version. (será del kernel)


I' hope sb can help, Espero que alguien me tire un soga!

Saludos


*******************************************************************
>
> Hello again /Hola de nuevo
>
> i'm still trying to make it work but without luck. I`ve realised that the module is loaded, i saw that was loaded in the when booting the system and i loaded again with modprobe snd-cmipci, but don't detect it.  The output for the lspci is: "> >> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc", perhaps don't realise that is an audio card. when i put on the terminal alsaconf -m snd-cmipci, the script take more time to execute but the result is the same.

>
> As I saw in some mail i look for the files in /dev/snd, there isn't anyone which starts with dsp.
> On the /dev directory i found adsp, adsp0, adsp1,adsp2,adsp3 and 4 , adps was a link to adsp0 i deleted and i created a new one to adsp1, new mixer options appeared on the volume menu, but the system hang up.
>
> Anybody has some idea?
>
> thank you ....cheers
>
> Todavía estoy tratando de hacer andar el audio, me di cuenta de que el mòdulo snd-cmipci esta cargado, de todas formas lo volvi a cargar, pero sigue sin detectar la placa, por ahí el sistema no se da cuenta de que el dispositivo > >> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc> >> CM8738 (rev 10), es la placa de audio. TRaté con alsaconf -m snd-cmipci, pero tampoco funcionò a pesar de que tard´p más tiempo en ejecutarse el script.

>
> Ví un mail en que se proponía cambiar el link /dev/dsp de dps0 dsp1, pero no tengo esos dispositivos ni en /dev/sound ni en /dev. En cambio hay otros que son adsp, adsp1,adsp2, ..4 y lo que hice fue cambiar el link adsp de adsp0 a adsp1, lo que pasó fue que aparecieron nuevas opciones de mixer en el control del volumen, pero la máquina se colgó.
>
> Alguien tiene alguna idea de como resolver el problema?
>
> Muchas gracias
>
> Saludos
>
>
> Pablo
>
>
>
>
> > To: dynebolic@???
> > Date: Tue, 29 Mar 2011 13:44:31 +0000
> > From: giftmischer_01@???
> > Subject: Re: [dyne:bolic] Driver
> >
> > Hi & just create a /etc/rc.local file with your changes.
> >
> > Cheers,
> > Gifti
> >
> >
> > On Tue, 29 Mar 2011 11:27:08 -0000, Pablo Ferreira
> > <pelado_silveira@???> wrote:
> >
> > >
> > > That`s seem to be I good idea, I'm not with that pc in this moment, but
> > > I'll try the next time I work with that computer. If it works, Have I to
> > > write it like a script in any of the rc.d folders to make the change
> > > persistant?
> > >
> > > Thank's, I'll tell what happen.
> > >
> > > Thank you very much.
> > >
> > > Pablo
> > >
> > >> Date: Mon, 28 Mar 2011 07:55:58 -0700
> > >> From: ragriffi@???
> > >> To: dynebolic@???
> > >> Subject: Re: [dyne:bolic] Driver
> > >>
> > >> Perhaps you need to force db to load the kernel module for the C-Media
> > >> card. The snd module in the ALSA message won't be available if the
> > >> kernel module for the card doesn't load. Try issuing this command:
> > >>
> > >> modprobe snd-cmipci
> > >>
> > >> Then see if you get sound.
> > >>
> > >> This article specifically mentions a related C-Media card:
> > >> http://spot.river-styx.com/viewarticle.php?id=14
> > >>
> > >> Good luck,
> > >> -Richard
> > >>
> > >> On 03/27/2011 02:57 PM, Pablo Ferreira wrote:
> > >> >
> > >> > Hola, sigo molestando!
> > >> >
> > >> > In the directory
> > >> >
> > >> > /mnt/hd1/1/dyne/SDK/sys/share/alsa/cards         I found the  
> > >> CMI8338.conf which says "Configuration for the CMI 8338/8738 Chip ...."

> > >> >
> > >> > But when I execute alsaconf -p CMI8338 or CMI8738 the output is
> > >> "modinfo: could not find module snd"
> > >> >
> > >> > The output for lspci is:
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >    00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A]  
> > >> Chipset Host Bridge
> > >> >    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> > >> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc  
> > >> CM8738 (rev 10)
> > >> >    00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB  
> > >> 1.1 Controller (rev 80)
> > >> >    00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB  
> > >> 1.1 Controller (rev 80)
> > >> >    00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB  
> > >> 1.1 Controller (rev 80)
> > >> >    00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> > >> >    00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> > >> >    00:11.1 IDE interface: VIA Technologies, Inc.  
> > >> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> > >> >    00:11.6 Communication controller: VIA Technologies, Inc. AC'97  
> > >> Modem Controller (rev 80)
> > >> >    00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102  
> > >> [Rhine-II] (rev 74)
> > >> >    01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378  
> > >> [S3 UniChrome] Integrated Video (rev 01)

> > >> >
> > >> >
> > >> >
> > >> > When i execute alsaconf the output is:
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >    modinfo: could not find module snd
> > >> >    modinfo: could not find module snd
> > >> >    modinfo: could not find module snd
> > >> >    /usr/sbin/alsaconf: line 681: /usr/bin/awk: cannot execute binary  
> > >> file

> > >> >
> > >> >
> > >> > My knowledgment is very limited at this moment, i expect someone can
> > >> help me. thanks
> > >> >
> > >> > Saludos
> > >> >
> > >> >                       
> > >> > _______________________________________________
> > >> > dynebolic mailing list
> > >> > dynebolic@???
> > >> > http://lists.dyne.org/mailman/listinfo/dynebolic
> > >> >
> > >> _______________________________________________
> > >> dynebolic mailing list
> > >> dynebolic@???
> > >> http://lists.dyne.org/mailman/listinfo/dynebolic
> > >                       
> > > _______________________________________________
> > > dynebolic mailing list
> > > dynebolic@???
> > > http://lists.dyne.org/mailman/listinfo/dynebolic
> > _______________________________________________
> > dynebolic mailing list
> > dynebolic@???
> > http://lists.dyne.org/mailman/listinfo/dynebolic
>                       
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://lists.dyne.org/mailman/listinfo/dynebolic