:: Re: [dyne:bolic] Driver
Página Inicial
Delete this message
Reply to this message
Autor: Pablo Ferreira
Data:  
Para: dynebolic
Assunto: Re: [dyne:bolic] Driver

That`s seem to be I good idea, I'm not with that pc in this moment, but I'll try the next time I work with that computer. If it works, Have I to write it like a script in any of the rc.d folders to make the change persistant?

Thank's, I'll tell what happen.

Thank you very much.

Pablo

> Date: Mon, 28 Mar 2011 07:55:58 -0700
> From: ragriffi@???
> To: dynebolic@???
> Subject: Re: [dyne:bolic] Driver
>
> Perhaps you need to force db to load the kernel module for the C-Media
> card. The snd module in the ALSA message won't be available if the
> kernel module for the card doesn't load. Try issuing this command:
>
> modprobe snd-cmipci
>
> Then see if you get sound.
>
> This article specifically mentions a related C-Media card:
> http://spot.river-styx.com/viewarticle.php?id=14
>
> Good luck,
> -Richard
>
> On 03/27/2011 02:57 PM, Pablo Ferreira wrote:
> >
> > Hola, sigo molestando!
> >
> > In the directory
> >
> > /mnt/hd1/1/dyne/SDK/sys/share/alsa/cards         I found the CMI8338.conf which says "Configuration for the CMI 8338/8738 Chip ...."

> >
> > But when I execute alsaconf -p CMI8338 or CMI8738 the output is "modinfo: could not find module snd"
> >
> > The output for lspci is:
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >    00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
> >    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
> >    00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
> >    00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
> >    00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
> >    00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> >    00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> >    00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> >    00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
> >    00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
> >    01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)

> >
> >
> >
> > When i execute alsaconf the output is:
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >    modinfo: could not find module snd
> >    modinfo: could not find module snd
> >    modinfo: could not find module snd
> >    /usr/sbin/alsaconf: line 681: /usr/bin/awk: cannot execute binary file

> >
> >
> > My knowledgment is very limited at this moment, i expect someone can help me. thanks
> >
> > Saludos
> >
> >                       
> > _______________________________________________
> > dynebolic mailing list
> > dynebolic@???
> > http://lists.dyne.org/mailman/listinfo/dynebolic
> >
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://lists.dyne.org/mailman/listinfo/dynebolic