:: [dyne:bolic] Driver
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Pablo Ferreira
Datum:  
To: dynebolic
Betreff: [dyne:bolic] Driver

Hola, sigo molestando!

In the directory

/mnt/hd1/1/dyne/SDK/sys/share/alsa/cards         I found the CMI8338.conf which says "Configuration for the CMI 8338/8738 Chip ...."


But when I execute alsaconf -p CMI8338 or CMI8738 the output is "modinfo: could not find module snd"

The output for lspci is:












00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)



When i execute alsaconf the output is:













modinfo: could not find module snd
modinfo: could not find module snd
modinfo: could not find module snd
/usr/sbin/alsaconf: line 681: /usr/bin/awk: cannot execute binary file


My knowledgment is very limited at this moment, i expect someone can help me. thanks

Saludos