:: Re: [dyne:bolic] Midi Cable ?
Etusivu
Poista viesti
Vastaa
Lähettäjä: kaffer@freemail.hu
Päiväys:  
Vastaanottaja: dynebolic mailinglist
Aihe: Re: [dyne:bolic] Midi Cable ?
Hi all,

some of the USB devices need to be replugged after dyne stand up and
there you go !
So this is the case with my 2 Behringer UCA-202 and E-Mu Xboard61, etc.
USB hubs recognized at bootup sequence and other devices to, but seems
other than hubs need to replug after X starts...


rocko wrote:
> Hi there !
> Went to Guitar Center today and was going to get the E-mu USB midi, but
> the sales guy there said E-Mu went out of business years ago.
> So I ended up getting the M-Audio midisport. which seems to work however
> I can't get sound from my synth.
>
> When i do lsusb- it list the midisport on bus 1 device 3, but jack
> doesn't seem to see it, it list's a generic midi port 14,--or something
> similar, shouldn't it list the device by name, i could be wrong, just
> don't know.
>
> Anyway i'm not getting sound from my synth to my Dyne Box.
> I'm assuming there's a setting in Jack im not setting right.
> If some one could point me in the right direction that would be great.
>
>
> On Sun, 2009-05-10 at 08:46 +0000, kaffer@??? wrote:
>
>> Hi all !
>>
>> If anyone else needs this info:
>> M-Audio Uno 1x1 works as well right out of the box as well as E-Mu
>> Xboard series USB keyboards
>>
>> rocko wrote:
>>
>>> Hi there Dyne Bolicans !
>>> What is a good usb midi cable to use.
>>> been looking at Cake Walk and others here:
>>> http://www.guitarcenter.com/Audio-Interfaces-Computers-and-Peripherals,Page-2.gc?src=midi&ipp=15
>>> It's gota be usb cause i don't have game port on my Dyne Box.
>>>
>>> _______________________________________________
>>> dyne:bolic GNU/Linux http://dynebolic.org
>>> open wiki http://lab.dyne.org/DynebolicFaq
>>>
>>>
>>>
>>>
>> _______________________________________________
>> dyne:bolic GNU/Linux http://dynebolic.org
>> open wiki http://lab.dyne.org/DynebolicFaq
>>
>
> _______________________________________________
> dyne:bolic GNU/Linux http://dynebolic.org
> open wiki http://lab.dyne.org/DynebolicFaq
>
>
>