:: [dyne:bolic] CUPS revisited - para…
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Giftmischer
Ημερομηνία:  
Προς: dynebolic mailinglist
Αντικείμενο: [dyne:bolic] CUPS revisited - parallel port support?
Hi all,


I have a HP Deskjet640C connected at the parallel port.
CUPS loads succesfully while the dyne boot process (dyne.cfg).

By tiping "lpinfo -v" in my root shell, I'm missing the "direct
parallel..." entry:

network socket
network http
network ipp
network lpd
direct scsi
serial serial:/dev/ttyS0?baud=115200
serial serial:/dev/ttyS1?baud=115200
serial serial:/dev/ttyS2?baud=115200
serial serial:/dev/ttyS3?baud=115200
direct usb:/dev/usb/lp0
direct usb:/dev/usb/lp1
direct usb:/dev/usb/lp2
direct usb:/dev/usb/lp3
direct usb:/dev/usb/lp4
direct usb:/dev/usb/lp5
direct usb:/dev/usb/lp6
direct usb:/dev/usb/lp7
direct usb:/dev/usb/lp8
direct usb:/dev/usb/lp9
direct usb:/dev/usb/lp10
direct usb:/dev/usb/lp11
direct usb:/dev/usb/lp12
direct usb:/dev/usb/lp13
direct usb:/dev/usb/lp14
direct usb:/dev/usb/lp15

How do I get the printer running? - Or should I connect it to the serial
port?


Thanks in advance,
Yours,

Giftmischer
(Wesnoth roleplayer, currently@d:b_2.4.2)