Hi,
There are nvidia modules at the dyne repositry,
2 module download and use latest see how it goes.

andy
--- stomfisite <stomfisite@???> wrote:

> I have a lot of trouble with an AMD 64 with nVidia
> force4 and PCIE
> 5300 card. I usually have to set the driver to
> "vesa" to solve the
> problem on lots of distros, although with 32bit
> Ubuntu 7.10 it loads
> the nVidia kernel, and with the nvidia proprietary
> video driver, it
> is stable.
>
> I do have some problems with certain apps giving
> memory leaks. I
> thought this was an Xorg problem, but on trying the
> "nv", nvidia,
> and vesa drivers and running "xrestop" I could see
> the apps were
> using and not freeing pixel memory. I conclude it is
> the PCIE
> hardware, as on a Compaq 2.4GHz P4 with dual screen
> nvidia card, the
> problems disappear.
>
> Branislav Nakic wrote:
> > I have similar problems on my asus p5b, core2duo
> 6400, nvidia 7600gt. I
> > thought it had something to do with jmicron
> chipset and having mixed IDE and
> > SATA drives which gave me trouble with Ubuntu too,
> but I ditched the IDE
> > DVD-ROM and a HD but Dynebolic still don't boot to
> GUI. The same goes with
> > Knoppix and (of course) Pure Dyne. Ubuntu is
> alright now though....hm,
> > probably a graphics issue.
> >
> > On Jan 15, 2008 3:13 PM, Adityo Pratomo
> <quietdidit@???> wrote:
> >
> >> hm.. that's all i can say,
> >> 64-bit AMD dual core, 1 gb RAM, on-board graphic
> card, abit motherboard...
> >> my Ubuntu Studio 7.10 also suffers the same
> problem as the dyne.. so i
> >> suspect there's something wrong with my computer
> >>
> >>
> >> On 1/15/08, Matt Grice <mcjgrice@???>
> wrote:
> >>> Dyne runs fine on my amd 64 dual core in 32bit
> emulation mode. I reckon
> >>> it's something else. Can you send any more
> information?
> >>>
> >>> Matt
> >>> Sent from my BlackBerry(R) wireless device
> >>>
> >>> -----Original Message-----
> >>> From: "Adityo Pratomo" <quietdidit@???>
> >>>
> >>> Date: Tue, 15 Jan 2008 20:20:22
> >>> To:"dynebolic mailinglist"
> <dynebolic@???>
> >>> Subject: Re: [dyne:bolic] help on booting for
> the first time
> >>>
> >>>
> >>> *sigh.. does it means i can't use dyne to
> produce music or anything? is
> >>> there any other distro you can recommend me?
> >>>
> >>> On 1/15/08, Pink Wind <pinkwind10@???>
> wrote:
> >>>> Your actually running 786 system 2 generations
> over
> >>>> dyne is designed to run on low specs p1(586)
> 64mb ram.
> >>>> your p7 the drivers might be at nvidia site.
> >>>> The drivers are quite a bit off for dyne at
> present.
> >>>> As you need a 64bit amd os.
> >>>> The system can still see and read 32bit but 3rd
> part
> >>>> hardware wouldn't its just the processor that
> sees
> >>>> 32bit.
> >>>> If you are strugling try ubuntu amd_64 and work
> on
> >>>> dyne's drivers too.
> >>>>
> >>>> Anyway, found a wee gem guys
> >>>> http://www.mplayerhq.hu/design7/dload.html
> >>>> mplayer is run by these guys
> >>>>
> >>>> svn checkout
> svn://svn.mplayerhq.hu/mplayer/trunk
> >>>> mplayer
> >>>>
> >>>> runthis svn in terminal it will down load all
> codecs
> >>>> required to watch dvds on your pc but just for
> mplayer
> >>>> though. better than nothing.
> >>>>
> >>>> The svn was in hungary.
> >>>> Sit back and enjoy the movies.
> >>>>
> >>>> hippy hakin
> >>>> andy.
> >>>>
> >>>> --- Adityo Pratomo <quietdidit@???>
> wrote:
> >>>>
> >>>>> my graphic card is on board nvidia 8xxx (i
> kinda
> >>>>> forget the real type) on an
> >>>>> abit MoBo and
> >>>>> AMD 64 X2 4000+
> >>>>>
> >>>>> is it because the graphic card? or is it the
> >>>>> processor?
> >>>>>
> >>>>> On Jan 14, 2008 2:52 PM, Pink Wind
> >>>>> <pinkwind10@???> wrote:
> >>>>>
> >>>>>> mornin all
> >>>>>> What is your graphics card type? chipset
> >>>>>> Processor type too 586 or 686
> >>>>>>
> >>>>>> andy.
> >>>>>>
> >>>>>> Adityo Pratomo <quietdidit@???> wrote:
> >>>>> another question..
> >>>>>> After i type startx, it seems that there's a
> >>>>> problem with my display,
> >>>>>> because there's a message aboutx window
> cannot
> >>>>> load the display.. What's
> >>>>>> wrong with this? Is it because i'm using an
> >>>>> onboard graphic card? Bcause
> >>>>>> when i use dyne:bolic on my laptop, i didn't
> find
> >>>>> any problem...
> >>>>>> Any solution?
> >>>>>>
> >>>>>> thanks in advance
> >>>>>>
> >>>>>> On Jan 14, 2008 4:17 AM, Pink Wind
> >>>>>> wrote:
> >>>>>>
> >>>>>>> Hi, all this is my first note.
> >>>>>>> Just ignore the luther login.
> >>>>>>> Dyne is the most configurable os I've tried
> so
> >>>>> far great for messing
> >>>>>> with.
> >>>>>>> Very powerful tool system.
> >>>>>>> let the cd take you in to its own os first.
> >>>>>>> Nest but do'nt encrypt (superblock Problem).
> >>>>>>> copy dyne folder to root partition.
> >>>>>>> re start pc with disk in it.
> >>>>>>> it will ask you questions ignore them too.
> >>>>>>> The system update Q. you can let it run or
> say
> >>>>> no.
> >>>>>>> but its all auto then work on the grub
> config
> >>>>> for your system from the
> >>>>>>> dyne website.
> >>>>>>> If I had to tell you anymore it would ruin
> your
> >>>>> voyage of discovery.
> >>>>>>> Hippy Hakin
> >>>>>>>
> >>>>>>> Pink
> >>>>>>>
> >>>>>>>
> >>>>>>> Adityo Pratomo wrote: geez...thanks man..
> >>>>>>>
> >>>>>>> On Jan 11, 2008 7:57 PM, luis marques
> wrote:
> >>>>>>>
> >>>>>>>> hey!
> >>>>>>>> after you login type: startx and thats it!
> >>>>>>>>
> >>>>>>>> l
> >>>>>>>>
> >>>>>>>> Adityo Pratomo wrote:
> >>>>>>>>> hey, i've just about to tried dyne:bolic.
> >>>>> But nothing happened after
> >>>>>> i
> >>>>>>>>> logged in as "root" with the password
> >>>>> "luther". Just some command
> >>>>>>> prompt
> >>>>>>>> or
> >>>>>>>>> something. Can anybody help?
> >>>>>>>>>
> >>>>>>>>> thanks
> >>>>>>>>>
> >>>>>
> _______________________________________________
> >>>>>>>>> dynebolic mailing list
>
=== message truncated ===

      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ