:: Re: [dyne:bolic] Remastering with a…
Top Pagina
Delete this message
Reply to this message
Auteur: Guy
Datum:  
Aan: dynebolic mailinglist
Onderwerp: Re: [dyne:bolic] Remastering with a new kernel
Matt Grice wrote:

>Hi all,
>
>I'm currently trying to remaster a Dyne:Bolic CD with a different
>kernel. 2.6.18 has a bug which screws up my external USB HD. I've been
>trying to install 2.6.21-mm2-dyne from the dyne:bolic ftp site.
>The method I've been using is:
>
>dynesdk makesdk
>
>I then copy the .krn file into dyne...
>
>export KRN=2.6.21-mm2-dyne
>dynesdk mkkern (which goes smoothly)
>
>dynesdk mkinitrd (worked once, allowed an ISO to boot and run, but found
>no kernel modules)
>dynesdk -K mkinitrd (no error messages, always freezes)
>
>at this point, the system freezes at the output "populating the ramdisk"
>(or similar -my memory fails me... ), with no kernel messages (I had
>been tailing /var/log/messages). The system appears to lose all access
>to any discs at this point. the desktop still functions, but typing 'ls'
>into an xterm sits and hangs. trying to run a program has the same result.
>
>I'm running dyne docked on an NTFS hard drive with stacks of room on an
>AMD1700 with 512mb memory.
>
>Anyone had similar or can shed some light on to this strange behaviour?
>
>
>Matt
>
>

Hi
I haven't had all your problems but I did make an iso that wouldn't
boot. The problem was isolinux.cfg not having the right name for the
kernel. I did put the solution on the wiki under troubleshooting:

you need to edit the file /dyne/sdk/cdrom/isolinux/isolinux.cfg and
change the line kernel /dyne/linux to kernel /dyne/2618ck1d.krn (or
whatever the kernel is called) and run dynesdk mkiso again.

(from http://lab.dyne.org/TroubleShooting)

Hope this helps

Guy