:: Re: [dyne:bolic] Problems with wire…
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Ed Iglehart
Ημερομηνία:  
Προς: tipiglen
Υ/ο: dynebolic mailinglist
Αντικείμενο: Re: [dyne:bolic] Problems with wireless drivers.
Further to the note below:

When using Dhoruba, when I type:
[d:b] / #iwconfig eth1

I get:

    /eth1    NOT READY! ESSID:off/any
    /


etc., etc., etc. It will accept essid linksys, but not a channel
assignment or
anything else. And when I type:
[d:b] / #ndiswrapper -l

I get:

    /installed drivers:
    prisma00    driver installed, hardware (1260:3886) present (alternate
    driver: prism54)
    [d:b] / #
    /



ON ubuntu on the same machine:

    /root@ubuntu:/.//home/ed# cd /
    root@ubuntu:/# ndiswrapper -l
    prisma00 : driver installed
            device (1260:3886) present (alternate driver: p54pci)
    root@ubuntu:/#
    /


Also, I can't get Dhoruba to make my keyboard give British (euro?)
keymapping. The key for
# is <shift>3; the key labelled # delivers \, @ gives ", and no sign of a
sterling or euro currency symbols. I've set keyboard=United Kingdom in
/lib/dyne/configure/Dyne/dyne.cfg but that seems to have had exactly no
effect.

Any ideas?
Salaams,
ed


Ed Iglehart wrote:
> Namaste!
>
> I'm having great problems getting Dyne II to recognise the inbuilt
> Prism wireless system on my AmiloD laptop. I,ve tried to get it to
> work with ndiswrapper-ing the prisma00.inf set of files from the
> vendor (Conexant), and it informs me that the driver isn't installed
> (properly), and that an alternate driver is prism54. I've tried
> ndiswrapper -a prism54 [deviceid] to learn that prism54 isn't
> installed (properly).
>
> iwconfig eth1 (for that is what the wireless unit is called by dyne),
> says it isn't ready.
> ifconfig won't come 'up', but will take an address and commands to be
> 'dynamic', etc.
>
> I'm at my wits' end here. Can someone please make a suggetsion.
>
> Dyne II Dhoruba up and running well on an older ex-win ME computer,
> complete with pci wireless card. There the card's called ra0 (by
> dyne), and the driver seems to have been found automatically, but I
> had to do a wee script for /etc/rc.local with ifconfig, iwconfig and
> route commends for it to come up at boot.
> Everything else works great with Dhoruba on the laptop, (haven't tried
> wired ethernet) but the touchpad'll need a bit of fine tuning for
> sensitivity, etc. Are synaptics, synclient, syndaemon, etc. or other
> synaptics drivers available for/through dyne?
>
> Thanks for the excellent work you're engaged upon.
>
> Assalaam 'alaikum wa rahmatullaahi wa barakaatuhu
> Peace, God's mercy and blessings be upon you
> ed
>