:: Re: [dyne:bolic] New db user commen…
Página Principal
Delete this message
Reply to this message
Autor: Manuel Gamba
Data:  
Para: dynebolic
Assunto: Re: [dyne:bolic] New db user comments
Bomis,
I'm afraid to sat that I've tried to read the nest (created with that
command) on another PC and... no way!
I get errors like you and no boot...

May be an hardware issue?

from /var/log/messages:
(...)
Jul 19 19:38:52 (none) syslog.notice root: [*] boot sequence completed on 
Thu Jul 19 19:38:52 UTC 2007
Jul 19 19:38:52 (none) syslog.info logger: kernel:Linux dyne-000C6ECCF081 
2.6.18-ck1-dyne #5 SMP Thu Nov 16 17:52:56 UTC 2006 i686 athlon-4 i386 
GNU/Linux
Jul 19 19:38:52 (none) syslog.info logger: CPU: AMD Sempron(tm)   3000+
Jul 19 19:38:52 (none) syslog.info logger: flags: fpu vme de pse tsc msr pae 
mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 
3dnowext 3dnow up ts
Jul 19 19:38:52 (none) syslog.notice logger: === devices detected on pci 
bus:
Jul 19 19:38:52 (none) syslog.info logger: 00:00.0 Host bridge: VIA 
Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
Jul 19 19:38:52 (none) syslog.info logger: 00:01.0 PCI bridge: VIA 
Technologies, Inc. VT8237 PCI Bridge
Jul 19 19:38:52 (none) syslog.info logger: 00:10.0 USB Controller: VIA 
Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
Jul 19 19:38:52 (none) syslog.info logger: 00:10.1 USB Controller: VIA 
Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
Jul 19 19:38:52 (none) syslog.info logger: 00:10.2 USB Controller: VIA 
Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
Jul 19 19:38:52 (none) syslog.info logger: 00:10.3 USB Controller: VIA 
Technologies, Inc. USB 2.0 (rev 82)
Jul 19 19:38:52 (none) syslog.info logger: 00:11.0 ISA bridge: VIA 
Technologies, Inc. VT8235 ISA Bridge
Jul 19 19:38:52 (none) syslog.info logger: 00:11.1 IDE interface: VIA 
Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE 
(rev 06)
Jul 19 19:38:52 (none) syslog.info logger: 00:11.5 Multimedia audio 
controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller 
(rev 50)
Jul 19 19:38:52 (none) syslog.info logger: 00:12.0 Ethernet controller: VIA 
Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Jul 19 19:38:52 (none) syslog.info logger: 01:00.0 VGA compatible 
controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
Jul 19 19:38:52 (none) syslog.notice logger: === kernel modules loaded:
Jul 19 19:38:52 (none) syslog.info logger: Module                  Size  
Used by
Jul 19 19:38:52 (none) syslog.info logger: video                  17796  0
Jul 19 19:38:52 (none) syslog.info logger: thermal                14984  0
Jul 19 19:38:52 (none) syslog.info logger: processor              32200  1 
thermal
Jul 19 19:38:52 (none) syslog.info logger: fan                     6020  0
Jul 19 19:38:52 (none) syslog.info logger: button                  7824  0
Jul 19 19:38:52 (none) syslog.info logger: battery                10884  0
Jul 19 19:38:52 (none) syslog.info logger: ac                      6276  0
Jul 19 19:38:52 (none) syslog.info logger: smbfs                  65144  0
Jul 19 19:38:52 (none) syslog.info logger: snd_seq_dummy           4996  0
Jul 19 19:38:52 (none) syslog.info logger: snd_seq_oss            33664  0
Jul 19 19:38:52 (none) syslog.info logger: snd_seq_midi_event      8448  1 
snd_seq_oss
Jul 19 19:38:52 (none) syslog.info logger: snd_pcm_oss            44832  0
Jul 19 19:38:52 (none) syslog.info logger: snd_mixer_oss          18176  1 
snd_pcm_oss
Jul 19 19:38:52 (none) syslog.info logger: snd_seq                52944  5 
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
Jul 19 19:38:52 (none) syslog.info logger: realtime                8320  0
Jul 19 19:38:52 (none) syslog.info logger: ehci_hcd               31752  0
Jul 19 19:38:52 (none) syslog.info logger: i2c_viapro             10004  0
Jul 19 19:38:52 (none) syslog.info logger: radeonfb              107712  0
Jul 19 19:38:52 (none) syslog.info logger: i2c_algo_bit           10248  1 
radeonfb
Jul 19 19:38:52 (none) syslog.info logger: i2c_core               22528  3 
i2c_viapro,radeonfb,i2c_algo_bit
Jul 19 19:38:52 (none) syslog.info logger: shpchp                 37920  0
Jul 19 19:38:52 (none) syslog.info logger: pci_hotplug            32832  1 
shpchp
Jul 19 19:38:52 (none) syslog.info logger: via_agp                10880  1
Jul 19 19:38:52 (none) syslog.info logger: via_rhine              25608  0
Jul 19 19:38:52 (none) syslog.info logger: snd_via82xx            29080  0
Jul 19 19:38:52 (none) syslog.info logger: gameport               16776  1 
snd_via82xx
Jul 19 19:38:52 (none) syslog.info logger: snd_ac97_codec         90528  1 
snd_via82xx
Jul 19 19:38:52 (none) syslog.info logger: snd_ac97_bus            3456  1 
snd_ac97_codec
Jul 19 19:38:52 (none) syslog.info logger: snd_pcm                73732  3 
snd_pcm_oss,snd_via82xx,snd_ac97_codec
Jul 19 19:38:52 (none) syslog.info logger: snd_timer              25476  2 
snd_seq,snd_pcm
Jul 19 19:38:52 (none) syslog.info logger: snd_page_alloc         11144  2 
snd_via82xx,snd_pcm
Jul 19 19:38:52 (none) syslog.info logger: snd_mpu401_uart         9856  1 
snd_via82xx
Jul 19 19:38:52 (none) syslog.info logger: snd_rawmidi            25888  1 
snd_mpu401_uart
Jul 19 19:38:52 (none) syslog.info logger: snd_seq_device          9228  4 
snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
Jul 19 19:38:52 (none) syslog.info logger: unionfs                83364  2
Jul 19 19:38:52 (none) syslog.info logger: ntfs                  103668  4
Jul 19 19:38:52 (none) syslog.info logger: usb_storage            74048  0
(...)


any ideas?!

many thanks,
ciao
-Manuel-





>From: "Bomis" <prendin@???>
>Reply-To: dynebolic mailinglist <dynebolic@???>
>To: "dynebolic mailinglist" <dynebolic@???>
>Subject: Re: [dyne:bolic] New db user comments
>Date: Thu, 19 Jul 2007 12:33:50 -0400
>MIME-Version: 1.0
>Received: from quico.dyne.org ([194.109.134.136]) by
>bay0-mc10-f13.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.2668); Thu,
>19 Jul 2007 09:34:01 -0700
>Received: from quico.dyne.org (localhost [127.0.0.1])by quico.dyne.org
>(Postfix) with ESMTP id 863478B770;Thu, 19 Jul 2007 18:33:56 +0200 (CEST)
>Received: from out2.smtp.messagingengine.com
>(out2.smtp.messagingengine.com[66.111.4.26]) by quico.dyne.org (Postfix)
>with ESMTP id BBAD683882for <dynebolic@???>; Thu, 19 Jul 2007
>18:33:52 +0200 (CEST)
>Received: from compute2.internal (compute2.internal [10.202.2.42])by
>out1.messagingengine.com (Postfix) with ESMTP id 8A6C29E5Ffor
><dynebolic@???>; Thu, 19 Jul 2007 12:33:50 -0400 (EDT)
>Received: from web6.messagingengine.com ([10.202.2.215])by
>compute2.internal (MEProxy); Thu, 19 Jul 2007 12:33:51 -0400
>Received: by web6.messagingengine.com (Postfix, from userid 99)id
>C87B119C9F; Thu, 19 Jul 2007 12:33:50 -0400 (EDT)
>X-Message-Info:
>LsUYwwHHNt30K9L3krFLO12OfkMxv6nCV6Z7xy4ueTk3qOrbE0ZN5r6TY+bLCB7C
>X-Original-To: dynebolic@???
>Delivered-To: dynebolic@???
>X-Sasl-Enc: stDkem3eZNXgCnXIa7G1eUbfKGM9V+P/POgvAacfg0xn 1184862830
>X-Mailer: MessagingEngine.com Webmail Interface
>References:
><1184629697.29606.1200481241@???><469CCA23.9040905@???><1184683138.23557.1200591761@???><469CDE5D.4010301@???><1184796913.11489.1200878173@???><BAY103-DAV144DC880A08A39AC4E3281E6FB0@???><1184859277.5949.1201008439@???><BAY103-DAV17F5CFA6E310061B7A7368E6FB0@???>
>X-BeenThere: dynebolic@???
>X-Mailman-Version: 2.1.6
>Precedence: list
>List-Id: dynebolic mailinglist <dynebolic.lists.dyne.org>
>List-Unsubscribe:
><http://lists.dyne.org/mailman/listinfo/dynebolic>,<mailto:dynebolic-request@lists.dyne.org?subject=unsubscribe>
>List-Archive: <http://lists.dyne.org/dynebolic>
>List-Post: <mailto:dynebolic@lists.dyne.org>
>List-Help: <mailto:dynebolic-request@lists.dyne.org?subject=help>
>List-Subscribe:
><http://lists.dyne.org/mailman/listinfo/dynebolic>,<mailto:dynebolic-request@lists.dyne.org?subject=subscribe>
>Errors-To: dynebolic-bounces@???
>Return-Path: dynebolic-bounces@???
>X-OriginalArrivalTime: 19 Jul 2007 16:34:01.0488 (UTC)
>FILETIME=[9CFD1900:01C7CA22]
>
>Manuel,
>
>I'll try that out later on. I'll write back with my results. Thanks!
>
>I.
>
>On Thu, 19 Jul 2007 17:53:00 +0200, "Manuel Gamba"
><manuel_gamba@???> said:
> > Bomis,
> > if you haven't formatted your usb stick we can assume that it has only 1
> > partition. :)
> > So...
> >
> > mknest -f /mnt/hd<x>/<y>/dyne/dyne.nst,<size>
> >
> > will be in your case:
> >
> > mknest -f /mnt/hd2/1/dyne/dyne.nst,256
> >
> > and you'll obtain a nest on hard disk 2 (hd2) partition 1 (/1) of 256MB
> > in
> > size.
> >
> > > I did note that, when I set up my test "nests" before, d:b thought my
> > > usb drive was a hard drive, not a usb drive.
> >
> > the same to me, and I've resolved the issue with that command... hope
>the
> > same for you!
> >
> > ciao,
> > -Manuel-
> > ----- Original Message -----
> > From: "Bomis" <prendin@???>
> > To: "dynebolic mailinglist" <dynebolic@???>
> > Sent: Thursday, July 19, 2007 17:34
> > Subject: Re: [dyne:bolic] New db user comments
> >
> >
> > > Manuel,
> > >
> > > I haven't formatted the drive, but XP says it's FAT32. I was able to
> > > write to it (the drive) with Linux Mint without a problem.
> > >
> > > So, you're describing the creation of a "nest" via the terminal, not
>the
> > > "duck" interface, right?
> > >
> > > I did note that, when I set up my test "nests" before, d:b thought my
> > > usb drive was a hard drive, not a usb drive. I wonder if that has
> > > anything to do with the problem. When you say hd number, I suppose
>this
> > > means "2", as I have one actual hard drive.
> > >
> > > I don't have a partition on the usb drive. Is this necessary? I'm
>not
> > > sure what to do with the <y> parameter in this case.
> > >
> > > Thanks!
> > >
> > > I.
> > >
> > > On Thu, 19 Jul 2007 11:08:47 +0200, "Manuel Gamba"
> > > <manuel_gamba@???> said:
> > >> Bomis,
> > >> I had the same problem with my usb.
> > >> Surely you've formatted it with a 'writable' filesystem (not NTFS).
> > >>
> > >> I've found a note from jaromil in mailing archives and resolved the
> > >> issue:
> > >>
> > >> from commandline:
> > >> mknest -f /mnt/hd<x>/<y>/dyne/dyne.nst,<size>
> > >>
> > >> where x and y are hd number and partition of your usb stick and size
>is
> > >> in
> > >> megabytes.
> > >>
> > >> hope this helps,
> > >> ciao
> > >> -Manuel-
> > >> ----- Original Message -----
> > >> From: "Bomis" <prendin@???>
> > >> To: "dynebolic mailinglist" <dynebolic@???>
> > >> Sent: Thursday, July 19, 2007 00:15
> > >> Subject: Re: [dyne:bolic] New db user comments
> > >>
> > >>
> > >> > Regarding the failure to boot using my usb "nest":
> > >> >
> > >> > Tried it again, this time without using encryption. No difference.
> > >> > Here's what showed up on the screen:
> > >> >
> > >> > file etc/ld.so.conf is not writable
> > >> > can't insert line /opt/audio/lib
> > >> > [same repeated for image, network, text, video, xfce in place of
>audio]
> > >> >
> > >> > can't open configuration file /etc/ld.so.conf: input/output error
> > >> > can't create temporary cache file
> > >> > /etc/ld.so.cache: read-only file system
> > >> >
> > >> > So...my usb drive is read-only? Or the nest is? Why would that
> > >> > happen?
> > >> >
> > >> > Also...still coping with super-accelerated mouse even at the
>slowest
> > >> > setting. Any ideas?
> > >> >
> > >> > Thanks!
> > >> >
> > >> > I.
> > >> >
> > >> >
> > >> > On Tue, 17 Jul 2007 16:21:01 +0100, "Guy" <sayhi2guy@???>
> > >> > said:
> > >> >> Bomis wrote:
> > >> >>
> > >> >> >Hi, Guy (and all),
> > >> >> >
> > >> >> >Yes, the startup sequence did stop and ask me for the password to
> > >> >> >access
> > >> >> >the usb "nest". I'll have to test the thing again to see exactly
> > >> >> >what
> > >> >> >is happening. I do know that it found something unsatisfactory
>and
> > >> >> >then
> > >> >> >it stopped. Having searched through the mailing list archives, I
>see
> > >> >> >that others have had similar problems with the usb "nest".
> > >> >> >
> > >> >> >I don't know what the format of the usb drive is. It's just a
> > >> >> >standard
> > >> >> >unit from one of the office supply stores.
> > >> >> >
> > >> >> >Another question I forgot to ask: when using firefox via
>dyne:bolic,
> > >> >> >there's no flash plugin installed (unlike with Linux Mint, which
>I'm
> > >> >> >testing right now...very nice [but no cool rasta stuff!]). I'm
>sure
> > >> >> >it's very easy to fix that, but I'm clueless as to how. Do I
>need to
> > >> >> >"dock" the OS to be able to do that?
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> If it were me, I would try making a nest that is not password
> > >> >> protected
> > >> >> to see if that is the issue or whether it is a problem with the
> > >> >> nesting
> > >> >> system itself - that may isolate the problem at least. I must
>admit I
> > >> >> haven't encrypted my nest. My life is far too boring .....
> > >> >>
> > >> >> Flash will not be in there as it is not 'free' software, in the
>sense
> > >> >> that it does not offer the freedoms guaranteed by the GPL (if you
>are
> > >> >> perplexed check out the free software foundation's site
> > >> >> http://www.fsf.org/). Different distros have different opinions
>about
> > >> >> including 'non-free' software. However, if you get software
>packages
> > >> >> for anything you want, you can install them to a running
>dyne:bolic
> > >> >> sytem - there is a link off the wiki's FAQ page explaining how.
>You
> > >> >> will have to reinstall them after booting again (docking doesn't
> > >> >> change
> > >> >> this) - this can be seen as a bonus because you can install
>anything &
> > >> >> 100% lose it if you don't want it again. The only way to make
>them
> > >> >> permanent is to remaster d:b or make a module.
> > >> >>
> > >> >> best
> > >> >>
> > >> >> Guy
> > >> >
> > >> > --
> > >> > http://www.fastmail.fm - Or how I learned to stop worrying and
> > >> >                          love email again

> > >> >
> > >> > _______________________________________________
> > >> > dynebolic mailing list
> > >> > dynebolic@???
> > >> > http://lists.dyne.org/mailman/listinfo/dynebolic
> > >> >
> > >>
> > >> _______________________________________________
> > >> dynebolic mailing list
> > >> dynebolic@???
> > >> http://lists.dyne.org/mailman/listinfo/dynebolic
> > >
> > > --
> > > http://www.fastmail.fm - Send your email first class
> > >
> > > _______________________________________________
> > > dynebolic mailing list
> > > dynebolic@???
> > > http://lists.dyne.org/mailman/listinfo/dynebolic
> > >
> >
> > _______________________________________________
> > dynebolic mailing list
> > dynebolic@???
> > http://lists.dyne.org/mailman/listinfo/dynebolic
>
>--
>http://www.fastmail.fm - IMAP accessible web-mail
>
>_______________________________________________
>dynebolic mailing list
>dynebolic@???
>http://lists.dyne.org/mailman/listinfo/dynebolic


_________________________________________________________________
Ecco Windows Live Hotmail: 2 GB e protezione antispam, GRATIS!
http://imagine-windowslive.com/hotmail/?locale=it#0