:: Re: [dyne:bolic] New db user commen…
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Manuel Gamba
Datum:  
To: dynebolic mailinglist
Betreff: Re: [dyne:bolic] New db user comments
Bomis,
I had the same problem with my usb.
Surely you've formatted it with a 'writable' filesystem (not NTFS).

I've found a note from jaromil in mailing archives and resolved the issue:

from commandline:
mknest -f /mnt/hd<x>/<y>/dyne/dyne.nst,<size>

where x and y are hd number and partition of your usb stick and size is in
megabytes.

hope this helps,
ciao
-Manuel-
----- Original Message -----
From: "Bomis" <prendin@???>
To: "dynebolic mailinglist" <dynebolic@???>
Sent: Thursday, July 19, 2007 00:15
Subject: Re: [dyne:bolic] New db user comments


> Regarding the failure to boot using my usb "nest":
>
> Tried it again, this time without using encryption. No difference.
> Here's what showed up on the screen:
>
> file etc/ld.so.conf is not writable
> can't insert line /opt/audio/lib
> [same repeated for image, network, text, video, xfce in place of audio]
>
> can't open configuration file /etc/ld.so.conf: input/output error
> can't create temporary cache file
> /etc/ld.so.cache: read-only file system
>
> So...my usb drive is read-only? Or the nest is? Why would that happen?
>
> Also...still coping with super-accelerated mouse even at the slowest
> setting. Any ideas?
>
> Thanks!
>
> I.
>
>
> On Tue, 17 Jul 2007 16:21:01 +0100, "Guy" <sayhi2guy@???>
> said:
>> Bomis wrote:
>>
>> >Hi, Guy (and all),
>> >
>> >Yes, the startup sequence did stop and ask me for the password to access
>> >the usb "nest". I'll have to test the thing again to see exactly what
>> >is happening. I do know that it found something unsatisfactory and then
>> >it stopped. Having searched through the mailing list archives, I see
>> >that others have had similar problems with the usb "nest".
>> >
>> >I don't know what the format of the usb drive is. It's just a standard
>> >unit from one of the office supply stores.
>> >
>> >Another question I forgot to ask: when using firefox via dyne:bolic,
>> >there's no flash plugin installed (unlike with Linux Mint, which I'm
>> >testing right now...very nice [but no cool rasta stuff!]). I'm sure
>> >it's very easy to fix that, but I'm clueless as to how. Do I need to
>> >"dock" the OS to be able to do that?
>> >
>> >
>> >
>> If it were me, I would try making a nest that is not password protected
>> to see if that is the issue or whether it is a problem with the nesting
>> system itself - that may isolate the problem at least. I must admit I
>> haven't encrypted my nest. My life is far too boring .....
>>
>> Flash will not be in there as it is not 'free' software, in the sense
>> that it does not offer the freedoms guaranteed by the GPL (if you are
>> perplexed check out the free software foundation's site
>> http://www.fsf.org/). Different distros have different opinions about
>> including 'non-free' software. However, if you get software packages
>> for anything you want, you can install them to a running dyne:bolic
>> sytem - there is a link off the wiki's FAQ page explaining how. You
>> will have to reinstall them after booting again (docking doesn't change
>> this) - this can be seen as a bonus because you can install anything &
>> 100% lose it if you don't want it again. The only way to make them
>> permanent is to remaster d:b or make a module.
>>
>> best
>>
>> Guy
>
> -- 
> http://www.fastmail.fm - Or how I learned to stop worrying and
>                          love email again

>
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://lists.dyne.org/mailman/listinfo/dynebolic
>