:: Re: [dyne:bolic] Can't boot Dynebol…
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Richard Hamel-Smith
Ημερομηνία:  
Προς: dynebolic mailinglist
Αντικείμενο: Re: [dyne:bolic] Can't boot Dynebolic
what wireless card are you using, Tommy?

you can download 2.1 here

ftp://ftp.dyne.org/dynebolic/releases/v2/dyne-2.1.iso

On 12/2/06, tommy mcdurmon <tommac@???> wrote:
> Chris Greenman wrote:
> > Cool. thanks for the info. As long as I'm not losing
> > any functionality by running 2.1 then I might as well
> > stick with it since it boots with no problem.
> >
> > I do have another question though (and this might be
> > better in a new thread). I tried nesting 2.1 on my
> > hard drive but it doesn't seem to pick up any of my
> > desktop settings. I'm pretty picky when it comes to
> > how I like my desktop and it's a pain to have to reset
> > all my prefs when I boot. It does detect the nest and
> > asks if I want to use it so I tell it "Yes" but when
> > it starts X none of my personal settings are there.
> >
> > Any suggestions?
> >
> >
> > --- Richard Hamel-Smith <richardhamelsmith@???>
> > wrote:
> >
> >
> >> BTW, I prefer 2.1 myself. I only carry 2.3 with me
> >> to give it away.
> >> 2.1 works on all machines I've tried it on so far
> >> without a hiccup
> >> And the wireless works, tho' sometimes I have to set
> >> it up manually.
> >> But I alway check the ifconfig on any machine I use,
> >> so I'm used to it.
> >> 2.1 also has the advantage that Tor is set up and
> >> running on boot, whereas
> >> on 2.2, 2.3, it's not.
> >>
> >>
> >> On 12/2/06, Richard Hamel-Smith
> >> <richardhamelsmith@???> wrote:
> >>
> >>> Happily, the config file is in /proc/config.gz
> >>>
> >>> just copy to /tmp, gunzip and you're ready to go
> >>>
> >>> Richard
> >>>
> >>> On 12/2/06, Chris Greenman <ckgreenman@???>
> >>>
> >> wrote:
> >>
> >>>> I did some more playing around last night and it
> >>>>
> >> turns
> >>
> >>>> out that my wireless card does work in 2.1 but I
> >>>>
> >> have
> >>
> >>>> to manually set it up using iwconfig.
> >>>>
> >>>> I guess I'll have to just use 2.1 until I
> >>>>
> >> figureout
> >>
> >>>> how to get 3.2 booted. I'll probably have to
> >>>>
> >> use a
> >>
> >>>> different machine and compile a custom kernel
> >>>>
> >> and burn
> >>
> >>>> it back to disk.
> >>>>
> >>>> Does anyone have some pointers on how to do
> >>>>
> >> that? I
> >>
> >>>> know how to compile the kernel so all I need is
> >>>>
> >> the
> >>
> >>>> config file used to build the kernel and
> >>>>
> >> instructions
> >>
> >>>> on how to build the dyne stuff. The instruction
> >>>>
> >> on
> >>
> >>>> the dev page aren't that clear.
> >>>>
> >>>>
> >>>> --- Chris Greenman <ckgreenman@???> wrote:
> >>>>
> >>>>
> >>>>> Ok, here's the results of my playing around
> >>>>>
> >> last
> >>
> >>>>> night.
> >>>>>
> >>>>> Fist off, the nodma kernel option did not
> >>>>>
> >> work.
> >>
> >>>>> Second, I tried the docked d:b again just to
> >>>>>
> >> make
> >>
> >>>>> sure
> >>>>> and I get the same results as with the CD.
> >>>>>
> >>>>> Third, d:b 2.2 won't boot either. Infact it
> >>>>>
> >> doesn't
> >>
> >>>>> even get past the isolinux bootloader.
> >>>>>
> >>>>> Finally, d:b 2.1 boots just fine but after
> >>>>>
> >> poking
> >>
> >>>>> around a little it doesn't look like the
> >>>>>
> >> wireless
> >>
> >>>>> driver is loading right. I didn't try loading
> >>>>>
> >> it
> >>
> >>>>> manually from the command prompt though.
> >>>>>
> >>>>>
> >>>>> I also poked around under Ubuntu which runs
> >>>>> flawlessly
> >>>>> on this laptop and the kernel version is
> >>>>>
> >> 2.6.16.
> >>
> >>>>> Also
> >>>>> the Uniform CD-Rom driver in Ubuntu is 3.20
> >>>>>
> >> which is
> >>
> >>>>> the same as d:b 2.3. I forgot to grab the
> >>>>>
> >> dmesg
> >>
> >>>>> output this morning before coming to work but
> >>>>>
> >> I do
> >>
> >>>>> know that there is no mention of RAID devices
> >>>>> following the CD-ROM driver. I'm thinking the
> >>>>>
> >> RAID
> >>
> >>>>> driver might be screwing with something in my
> >>>>> system.
> >>>>> Does anyone know if there is a kernel option
> >>>>>
> >> that
> >>
> >>>>> will
> >>>>> prevent loading the RAID driver?
> >>>>>
> >>>>>
> >>>>> --- Chris Greenman <ckgreenman@???>
> >>>>>
> >> wrote:
> >>
> >>>>>> Interesting. The internal CD drive is a
> >>>>>>
> >> DVD/CDRW
> >>
> >>>>>> combo. I've never had problems with it
> >>>>>>
> >> before but
> >>
> >>>>>> maybe something changed in the driver.
> >>>>>>
> >>>>>> As for the f2 thing, I've tried pretty much
> >>>>>>
> >> every
> >>
> >>>>>> one
> >>>>>> of the options (and a few that aren't
> >>>>>>
> >> listed) and
> >>
> >>>>>> nothing changes. The standard kernel
> >>>>>>
> >> messages
> >>
> >>>>> spew
> >>>>>
> >>>>>> out until it hits the CD-Rom driver then
> >>>>>>
> >>>>> everythign
> >>>>>
> >>>>>> stops.
> >>>>>>
> >>>>>> I'll do a little more playing tonight now
> >>>>>>
> >> that
> >>
> >>>>> I've
> >>>>>
> >>>>>> gotten some suggestions and I'll let you all
> >>>>>>
> >> know
> >>
> >>>>>> how
> >>>>>> it went.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> --- Dan Conklin <danconklin@???>
> >>>>>>
> >> wrote:
> >>
> >>>>>>> When you boot, hit f2 and there is an
> >>>>>>>
> >>>>> interactive
> >>>>>
> >>>>>>> option there that might help. I tried it
> >>>>>>>
> >> and it
> >>
> >>>>>> just
> >>>>>>
> >>>>>>> seemed to slow down the boot enough to
> >>>>>>>
> >> read the
> >>
> >>>>>>> terminal a little easier. Anyway, I ran
> >>>>>>>
> >> dmesg to
> >>
> >>>>>> see
> >>>>>>
> >>>>>>> what loads on my machine after the uniform
> >>>>>>>
> >> CDROM
> >>
> >>>>>>> driver, and the next thing was that it
> >>>>>>>
> >>>>> reassigned
> >>>>>
> >>>>>>> the DVD ROM's drive allocation. After that
> >>>>>>>
> >> it
> >>
> >>>>>>> detected the RAID and SCSI devices and
> >>>>>>>
> >> assigned
> >>
> >>>>>>> resources to them. After that was the USB
> >>>>>>>
> >> hub
> >>
> >>>>> and
> >>>>>
> >>>>>>> then the mouse.Dan ConklinHelp fight
> >>>>>>>
> >> software
> >>
> >>>>>>> piracy...use Linux!Need to know something
> >>>>>>>
> >> about
> >>
> >>>>>>> shooting and editing video? Ask us! --- On
> >>>>>>>
> >> Thu
> >>
> >>>>>>> 11/30, Chris Greenman &lt;
> >>>>>>>
> >> ckgreenman@???
> >>
> >>>>>> &gt;
> >>>>>>
> >>>>>>> wrote:From: Chris Greenman [mailto:
> >>>>>>> ckgreenman@???]To:
> >>>>>>> dynebolic@???: Thu, 30 Nov
> >>>>>>>
> >> 2006
> >>
> >>>>>>> 07:52:14 -0800 (PST)Subject: Re:
> >>>>>>>
> >> [dyne:bolic]
> >>
> >>>>>> Can't
> >>>>>>
> >>>>>>> boot DynebolicNo problem. You didn't know
> >>>>>>>
> >> and I
> >>
> >>>>>>> didn't volunteerthat info :-). I work
> >>>>>>>
> >> primarily
> >>
> >>>>>> on
> >>>>>>
> >>>>>>> Solaris but I amalso an RHCE.Actually I
> >>>>>>>
> >> did try
> >>
> >>>>>>> docking and booting from the HD andit
> >>>>>>> still hangs. I also tried booting with
> >>>>>>>
> >> both of
> >>
> >>>>>>> thefloppy images on the d:b CD and got the
> >>>>>>>
> >> same
> >>
> >>>>>>> result. Like I said before I don't think
> >>>>>>>
> >> it's a
> >>
> >>>>>> CD
> >>>>>>
> >>>>>>> Problem. Ithink the issue is with what
> >>>>>>>
> >> ever
> >>
> >>>>> loads
> >>>>>
> >>>>>>> immediatelyafter that Uniform CD-ROM
> >>>>>>>
> >> driver.
> >>
> >>>>>>> Unfortunately sinceI can't get past that,
> >>>>>>>
> >> I have
> >>
> >>>>>> no
> >>>>>>
> >>>>>>> clue what is tryingto load.--
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >> _______________________________________________
> >>
> >>>>>>> Join Excite! - http://www.excite.com
> >>>>>>> The most personalized portal on the Web!
> >>>>>>>
> >> _______________________________________________
> >>
> >>
> > === message truncated ===
> >
> >
> >
> >
> >
> ____________________________________________________________________________________
> > Do you Yahoo!?
> > Everyone is raving about the all-new Yahoo! Mail beta.
> > http://new.mail.yahoo.com
> > _______________________________________________
> > dynebolic mailing list
> > dynebolic@???
> > http://mailinglists.dyne.org/mailman/listinfo/dynebolic
> >
> >
> Where do you download 2.1? I went to the dyne website but all I find is
> the latest version. I have tried 10 different Linux os's but none work
> on my wireless.
> thanks
> tom
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://mailinglists.dyne.org/mailman/listinfo/dynebolic
>