:: Re: [dyne:bolic] Hang on shutdown
Página superior
Eliminar este mensaje
Responder a este mensaje
Autor: Stefan Hackl
Fecha:  
A: Danconklin, dynebolic mailinglist
Asunto: Re: [dyne:bolic] Hang on shutdown
Hello,

I tried different possibilities without success. acpi=off, acpi=force, noapic
and various combinations. Still shutdown is impossible. For me it is no big
problem. I use Dynebolic just sometimes for multitrack recording. Normally I
work with Ubtunu 6.10, which runs perfectly.
So I can shut down the radical way. For me it is ok. I dont want to spend
precious time solving this. Thanks for your ideas. Dyne Bolic is great!

Stefan





Am Freitag, 1. Dezember 2006 20:35 schrieb Dan Conklin:
> That's probably an ACPI problem. There are several possible solutions, but
> try acpi=force in the boot command line.Dan ConklinHelp fight software
> piracy...use Linux!Need to know something about shooting and editing video?
> Ask us!--- On Fri 12/01, Stefan Hackl < Stefan-Hackl@??? > wrote:
> From: Stefan Hackl [mailto: Stefan-Hackl@???]To:
> dynebolic@???: Fri, 1 Dec 2006 19:59:39 +0100Subject:
> [dyne:bolic] Hang on shutdownHello,my dynebolic hangs when shutting down.
> It was the same issue with 2.2, now having upgraded to 2.3 it is still the
> problem. Any Idea? I always have to shutdown by turning of power
> supply.Best regards and thanks for all
> ideasstefan_______________________________________________dynebolic mailing
> listdynebolic@???http://mailinglists.dyne.org/mailman/listinfo/d
>ynebolic
>
> _______________________________________________
> Join Excite! - http://www.excite.com
> The most personalized portal on the Web!