:: Re: [dyne:bolic] dyne 2.1 nest caus…
Startseite
Nachricht löschen
Nachricht beantworten
Autor: jaromil
Datum:  
To: dynebolic mailinglist
Betreff: Re: [dyne:bolic] dyne 2.1 nest causes X loading problem
On Thu, Oct 19, 2006 at 05:27:05PM +1300, ryan wrote:
> If its just X causing trouble, you could boot into 2.1, save
> /etc/X11/xorg.conf somewhere, then boot into 2.2 and drop it back into
> /etc/X11/ . I had this problem with a i810 chip, xorg was trying to
> load an "nv" driver when I used a nest for some reason.


your guess is right, its X causing the problem, but the solution is
simply remove /etc/X11/xorg.conf from the nest, then it will be created
again by 2.2

the problem is caused by the upgrade to Xorg 7.1 in 2.2 which also
changed installation prefix so certain parts of the xorg.conf changed.

ciao

- --
jaromil, dyne.org rasta coder, http://afrolinux.org