:: Re: [dyne:bolic] Computer won't boo…
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Ricardo
Ημερομηνία:  
Προς: dynebolic mailinglist
Αντικείμενο: Re: [dyne:bolic] Computer won't boot after using dyne
Hallo Martin,

    My system is grounded (once I moved into a farm only after grounding one of the plugs where I wanted to use my computer. The electrical network here in Brazil is not exactly one of the bests of the world :-) ). But I'm not really sure if that's a hardware issue, than it only happens when I use dyne. With other distros (tried at least another 5 on the last months) the system works perfectly. That's the strange point. 


     Anyway thanks again for the tip.


            Ricardo


Martin Breguet <martinbreguet@???> escreveu: Ricardo,

Make sure your electrical system is properly grounded (la tierra). It is
vital for the well being of your PC... Where I live, plenty of users have
electricity without ground (you know, that long metal stick, planted into
the ground, that connects to the 3rd hole in the plug)...
So it possibly is the source of your hardware problem...

Hasta luego,

M.




On Thu, 12 Oct 2006 14:02:39 -0400, Ricardo wrote:

>           Olá,

>
>       Thanks a lot for the answers. I did what Martin said but it didn't  
> work. So I tried to use dyne:bolic without any HDs connected to see if  
> they could be the problem, but I still couldn't reboot the system  
> without removing the power cable for a while. After doing that, I docked  
> dyne on a partition, edited grub to boot the distro without CD,  
> unplugged the DVD drive (have only one) and started the system (thought  
> that drive could be the answer), but it didn't help. Conclusion: I think  
> the problem aren't the drives. Maybe it has something to do with the  
> memory, then what I see when the boot hangs are the following lines:

>
>     PC2-4300 Dual Channel Interleaved
>     Checking NVRAM
>     Initializing USB Controllers .. Done

>
> After that it should appear:
>
>     1024MB Ok
>     Auto-detecting primary master .....

>
>    Any ideas?

>
>        Ricardo

>
>
> Martin Breguet escreveu: You might need to
> shut down the pc, open it, unplug your hard
> drive(s), and boot your pc like this. Of course, after the POST, there
> won't be no boot, since the hdd is unplugged. Now you shut down again,
> and plug the hdd back. Boot, and you shouldn't have any more
> problem...
> M.
>
>
>
>
>
> ---------------------------------
> Novidade no Yahoo! Mail: receba alertas de novas mensagens no seu
> celular. Registre seu aparelho agora!




--
Servi-PC
Las Terrenas
República Dominicana
_______________________________________________
dynebolic mailing list
dynebolic@???
http://mailinglists.dyne.org/mailman/listinfo/dynebolic


        
---------------------------------
Você quer respostas para suas perguntas? Ou você sabe muito e quer compartilhar seu conhecimento? Experimente o Yahoo! Respostas!