:: Re: [dyne:bolic] Computer won't boo…
Página superior
Eliminar este mensaje
Responder a este mensaje
Autor: jaromil
Fecha:  
A: dynebolic mailinglist
Asunto: Re: [dyne:bolic] Computer won't boot after using dyne
On Wed, Oct 11, 2006 at 06:29:47PM -0400, Martin Breguet wrote:
> You might need to shut down the pc, open it, unplug your hard
> drive(s), and boot your pc like this. Of course, after the POST, there
> won't be no boot, since the hdd is unplugged. Now you shut down again,
> and plug the hdd back. Boot, and you shouldn't have any more
> problem...


well if you are wondering what dyne:II it does on your harddisk you may
as well read it clearly in the source:

http://dev.dynebolic.org/trac.cgi/browser/dyneII/startup/lib/volumes.sh
http://dev.dynebolic.org/trac.cgi/browser/dyneII/startup/lib/bootstrap.sh

files above deal with detecting and mounting devices

in general, all scripts are versioned and browsable at
http://dev.dynebolic.org/trac.cgi/browser/dyneII/startup/lib

ciao

- --
jaromil, dyne.org rasta coder, http://afrolinux.org